Electronics Forum | Sat Feb 19 09:31:30 EST 2005 | davef
Potential causes are: * Static charge [get a deionizing fan] * Adhesive on the inside of the cover tape [fix your supplier]
Electronics Forum | Mon Feb 21 03:56:34 EST 2005 | abhirami
Agree with Davef. Smaller the chip, more the static charge. I used to see this even with normal chips. Get an ionizer blow. It should solve your problem. May be switch to antistatic tape if affordable.Regards. GV
Electronics Forum | Mon Feb 21 12:51:30 EST 2005 | need help
Thanks for your help. We try the de-ionizer fan, helps some what but did not eliminate the problem. Can you tell me which model are you guys using.
Electronics Forum | Tue Mar 08 06:23:25 EST 2005 | aj
Just to let you all know. We got some nitrile powder free gloves and everything is fine now. We tried Vinyl but they were powdered so it really looks like it could be the powder and not the latex but I am sticking with the Nitrile powder free gloves
Electronics Forum | Thu Mar 24 12:37:25 EST 2005 | Dreamsniper
Don't switch to other vendors or suppliers. Stick with Cam/Alot. It's reliable and repeatable and besides you know the system well now. If you get a different brand you have to start again with the sickness of the equipment, learn it again and build
Electronics Forum | Thu Mar 24 10:15:56 EST 2005 | blueflag
Dear All We are using a my12 also tp11 with VIB feeders we are having major problems with ics in tubes are there any machines available to convert ics up to so16 from stick to tape & reel and are the cost effective ?????? Thanks Colin
Electronics Forum | Tue May 03 17:53:38 EDT 2005 | Frank
Comtra makes stick feeders, but I do not think they sell direct to end-users. Only thru the PnP manufacturers. They are in the midwest somewhere. If US Vibra is still in business is a good question. They are in Arizona, in Tucson I believe.
Electronics Forum | Mon Jun 27 11:24:03 EDT 2005 | russ
What size paste roll do you have on your stencil? It should be about 1/2" in diameter. What type of paste are you using? I have found that certain Mfgrs have this problem with some of their formulations. What typoe of printer and what is your squ
Electronics Forum | Mon Jun 27 11:32:45 EDT 2005 | sumote
Humidity level can play into this as well. Good blades will help the process. We use permalex blades from Transition Automation and we love them. YMMV
Electronics Forum | Mon Jun 27 14:09:25 EDT 2005 | davef
We've talked about this previously on SMTnet. Try searching the fine Archives. For instance: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=5473
