Electronics Forum | Wed Oct 15 15:47:35 EDT 2008 | mbrunton
Thank you Dana and Stephen, I will give it a shot now. I'm not surprised it's not in the manual... apparently there is tons of stuff not in the manual and Fuji tells me they have no idea what half of the unwritten stuff means :)
Electronics Forum | Wed Oct 15 15:52:37 EDT 2008 | robinj
I'm looking into buying an offline solder paste height measurement system. Which are the best systems out there? As far as getting a better image for consistent height measurement what are the different technologies out there. Thanks in advance for a
Electronics Forum | Wed Oct 15 18:00:42 EDT 2008 | davef
While you're waiting for others to reply, look here for a recent thread from the fine SMTnet Archives: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=56867
Electronics Forum | Thu Oct 16 07:57:20 EDT 2008 | pjc
http://www.solderpasteinspection.com/productservice.html http://www.sakicorp.com/eg/Products_/prod/voyager/ http://www.kohyoung.com/eng/product/product_01.asp http://www.lvtechnologies.com/ http://www.malcomtech.com/products_malcom.html
Electronics Forum | Tue Oct 21 16:24:34 EDT 2008 | mac5
We have had good luck with the Omron CKD VP3000L. I won't pass every good board, but it will fail every bad board.
Electronics Forum | Tue Oct 21 22:04:18 EDT 2008 | davef
Have you checked Daan Terstegge's excellent jump site? http://www.smtinfo.net/Db/_Dispensing.html
Electronics Forum | Thu Oct 23 08:01:42 EDT 2008 | gregcr
The area in question requires more than can be stenciled, and at 50K-100K units I can't imaging how many people I would have to hire to hand dispense the material.
Electronics Forum | Fri Oct 24 13:28:46 EDT 2008 | evtimov
Hi, In your case definitely go with a pure time/pressure. If you want to make repeatable small dots later - only Archimedian screw. Another way is jet printing technology, which I assume is very expensive and far away from your case. Regards, Emil
Electronics Forum | Wed Oct 15 17:40:42 EDT 2008 | bandjwet
Dear SMTNetters: What are some favorite techniques for getting all of the solder from a plated throughhole on a heavy ground plane area? We are using a SAC 405 alloy. Regards BWET
Electronics Forum | Thu Oct 16 07:23:36 EDT 2008 | rway
Hello, Does anyone know anything about this system? We currently use YesTech M1 AOI but are looking into this machine. Particularly the model 7301. Any insight you can provide as far as performance compared to YesTech or just over-all would be gr