Electronics Forum | Fri Sep 14 19:55:06 EDT 2018 | amartineck
I have a GSM1 that when try to zero it, it stops with the "Timeout waiting for spindle up" message. To get thsi up and running, I have set all my machine settings to default and had to reselect the head from a C4 1 head to the flex head. I initially
Electronics Forum | Thu Sep 20 07:18:42 EDT 2018 | proceng1
Has anyone else been experiencing this lately? We have had a rash of boards that come in properly vacuum sealed. We store them in the hot room until we are ready to build, and we get bubbles under the solder mask. We've had 4 different jobs, all di
Electronics Forum | Thu Jan 10 02:16:09 EST 2019 | ameenullakhan
Hi Steve, Thanks. This from the trusted supplier. HASL finished PCB. Even PCB supplier is using the water wash flux for fabrication. Its almost eliminated with N2 environment. And we had got a expert view from Dr. Lee of Indium on the issue st
Electronics Forum | Tue Feb 19 10:47:47 EST 2019 | rgduval
I'm with Steve. Check the datasheet, and make sure that the terminations are meant for solder application, and not conductive epoxy. I had that happen a year or so ago with an MLCC. Drove us nuts for two days (not to mention the significant rework
Electronics Forum | Mon May 13 09:45:39 EDT 2019 | spoiltforchoice
Interesting, I've not had a hands on with either Hawkeye or Ppeedprint SPI, however I was under the impression that speedprint printers give you an awful lot of printer for your money, comparing quite favorably with Asian brands with strong feature s
Electronics Forum | Mon Jul 01 14:46:47 EDT 2019 | assuredtech
It's been awhile but yes, if you do not allow the machine to optimize your program and your placing sequence is such that the tallest component is perhaps the 1st or last placement so it doesn't bump into other components, next is you may look into a
Electronics Forum | Wed Dec 04 08:02:02 EST 2019 | proceng1
Contact George Castonguay at PPM. He is a Jedi when it comes to these machines. In fact, since you just got it, a good investment would be to have George come in and go through the machine and get it calibrated. 603-895-5112 They also sell parts
Electronics Forum | Tue Nov 12 09:04:21 EST 2019 | mario85
Hello Guys, I'm new here. I am smt process engineer in new company located in Poland. I am responsible for whole smt line, so I have a lot of problems at the beginning :). I would like to ask about few things. The topic is solder balls. I produced s
Electronics Forum | Mon Jan 13 08:35:51 EST 2020 | griinder
The holes are calibrated in MSetup. Generally, I have never had luck using the auto teach for the nozzle changer. We would teach them each manually. Before doing this, you need to narrow your issue down a bit more. Which head gives you this error?
Electronics Forum | Mon Apr 20 23:56:47 EDT 2020 | SMTA-Samy
After I create the pick & place program on the pick and place machine (Assembléon, recently aquired by kulicke and soffa), we generate setup sheets for the operator which lists what component goes into what feeder. Upon loading a tape & reel in the f