Electronics Forum | Sat May 09 02:45:45 EDT 2015 | costas
Hi, I've bought a camera for video inspection ,Metcal VPI 1000 model. Price was reasonable. Unfortunately the light and video control box was missing. Now the light I can easily fix but I have no idea about the video part, I do not know the tasks for
Electronics Forum | Wed Jun 10 00:34:40 EDT 2015 | vinitverma
I understand from your post that the head does go to the nozzle changer intending to change the nozzle but sometimes it entirely fails to pick up the nozzle and sometimes the nozzle gets picked up a bit but gets stuck in the nozzle changer. This mos
Electronics Forum | Fri May 15 12:41:48 EDT 2015 | deanm
I chose a Vitronics XPM3i primarily for the AutoSet automatic profile generation feature. We are high mix and simply cannot profile every board. The AutoSet feature is quick, easy and we rely on it 100% and have great results. These ovens have had ve
Electronics Forum | Mon Jun 08 21:44:40 EDT 2015 | superlen
Thanks for the feedback and the confirmation that it is, in fact, a bug. I have trained my operators to always use file Save at the end of the day (up to a network drive) & then I have an external program that archives the daily setup back into our r
Electronics Forum | Tue Jul 14 02:45:40 EDT 2015 | alexeis
Hi, I agree that the existing systems sometimes difficult to implement. Also, as a large system so its maneuverability is low in spite of all the beautiful tools. Usually if you need something you do not find anything there. We, as a software compan
Electronics Forum | Wed Jul 01 13:17:39 EDT 2015 | davef
Cheryl Tulkoff and Randy Schueller do a good job summarizing the thinks on pad cratering here: http://www.smta.org/chapters/files/uppermidwest_padcratering.pdf Potential Mitigations to Pad Cratering * Board Redesign * Solder mask defined vs. non-s
Electronics Forum | Mon Aug 10 16:53:26 EDT 2015 | rgduval
If the pendulum is motor driven, it's more likely that a capacitor change will accomplish what you want than a resistor change. You've got a 47uF in there...try a factor of 10, and put a 4.7uF in there and see what happens. If the pendulum period i
Electronics Forum | Wed Aug 12 11:09:42 EDT 2015 | jvalverde
Hello, I have a problem with the solder paste process, I need a solder paste with no Start-up Time because We do not work 24 hours in the manufacturing process, we works only 8 hours a day and at the finish we need to store the paste in the refr
Electronics Forum | Fri Sep 18 13:11:38 EDT 2015 | dyoungquist
We used to run a TP9-2 but upgraded to the MY series about 5 years ago..... Encoder going bad is a likely possibility, especially on a machine that old. I can't say for sure that is your problem but we did have to replace an encoder on our TP9 (I
Electronics Forum | Sat Sep 26 02:09:39 EDT 2015 | aemery
Proc My field service back ground included Electrovert so I know reflow electrical quite well. I've worked on Heller, Conceptronic and Vitronics over the last few years and really there isn't a huge difference if you can read a schematic. I checked