Electronics Forum | Fri May 19 13:40:36 EDT 2006 | grantp
Hi, Sorry to drag this thread up again, but we were recommended to change the wave to SAC305, but is everyone recommending SN100C? That seems to be the feeling on this thread. What flux is used? Regards, Grant
Electronics Forum | Mon Jan 09 07:56:49 EST 2006 | slthomas
Squeegee pressure or height, snap off, the age and/or condition of the paste and the condition/cleanliness of the stencil are about all I can come up with, unless you got a new stencil and you changed the design parameters or they made it wrong.
Electronics Forum | Wed Jan 11 16:45:42 EST 2006 | russ
There is a log in the machine that needs to be renamed and cleaned out. It is called manuinfo and is in the SCP System directory. We copy this file then rename. then we delete the data out of the old one. This will speed you way up.
Electronics Forum | Tue Feb 14 10:38:37 EST 2006 | samir
I stand corrected! That's what I get for listening to our drugged up Maintenance guy. He told me, "The suf-FUC-tant acts as a barrier."
Electronics Forum | Thu Jan 19 12:05:41 EST 2006 | daxman
We've checked the Amplifiers, and the optics and they seem to be finctioning just fine. The issue doesn't seem to be related to specific heads. The errors show up often, and on random heads. Do you think this could be faulty reverse theta motors?
Electronics Forum | Fri Apr 21 03:20:04 EDT 2006 | kent_peterson
I think your refering to the sleeve. It is held in with loctite 262 or something. You can set up a bearing puller with a socket to pull it out around station 2-3. Fuji will drop the whole gear out to do this. Too much for a few sleeves.
Electronics Forum | Wed Jan 25 09:43:09 EST 2006 | billyd
Thanks Russ. I was pretty sure I'd be ending up going with that, since it seems to be a pretty popular kit, overall in the industry. Thanks again.
Electronics Forum | Sat Jan 28 08:31:00 EST 2006 | GS
Thank you Patrick, now I feel much more better My mother tongue is not English, so it takes plenty of time time to understand those enigma. I think that lawyers will have a lot of work thanks to the ROHS interpretation. Regards..........GS
Electronics Forum | Tue Jan 31 02:59:18 EST 2006 | jgarver1
You also should check to make sure you have blow off at the placing station set properly. I have seen machines with the flow control valve shut completely off not release parts properly. The parts end up in the scrap bin and the machine thinks they
Electronics Forum | Thu Feb 16 17:01:23 EST 2006 | darby
Never had anything to do with Soltec so I cannot comment on their service. However. You must realise that machine manufacturers/distributors incur a cost in storing spare parts and making them available for immediate delivery. They are not held on co