Electronics Forum | Tue Sep 16 13:43:48 EDT 2014 | gascon5383
We have new stencils produced every 15000 prints. Another technician takes care of that and he uses gerber files to have them produced. Also, we have over 300 different products that are produced, all board sizes are standardized 287mm long x either
Electronics Forum | Wed Oct 01 14:56:56 EDT 2014 | tim_wilkinson
Fuji_user_2014, I work in sales at Manncorp and we have a two styles of dry boxes you may want to consider. We have dry desiccant boxes that will store your components at less than 5% RH. We also have dry baking boxes that will store your componen
Electronics Forum | Sat Sep 27 17:58:12 EDT 2014 | isd_jwendell
What?? You haven't unpacked it yet? I unpacked mine (CSM7100V) the day it arrived. You need to make sure that all the parts are there and undamaged. Training has value. It is hard to justify that much money to get one of the Essemtec techs on-site.
Electronics Forum | Mon Oct 13 15:33:36 EDT 2014 | rgduval
So...today, we were able to get rid of the z axis not mounted error. It looks like we did so by modifying the settings in axes location (matched them to the beam 1 settings). Now, when we try to lower the nozzles, we can hear a relay or switch clic
Electronics Forum | Mon Oct 20 18:53:39 EDT 2014 | warwolf
pci express x1? https://www.google.co.nz/search?q=pci+express&client=firefox-a&hs=ZJi&rls=org.mozilla:en-GB:official&channel=sb&source=lnms&tbm=isch&sa=X&ei=DZJFVKvRDaXemAXaxoCgDA&ved=0CAgQ_AUoAQ&biw=1173&bih=849#rls=org.mozilla:en-GB:official&chann
Electronics Forum | Fri Nov 07 14:30:32 EST 2014 | klopi90
Hello! I am a lucky user of an ALD515 AOI, a cheap Chinese machine, and I would like to aks if anybody has any experience with it? My main problem is a lack of any manuals or tutorials for learning, what cause other difficulties. I have a one main
Electronics Forum | Thu Nov 13 10:05:18 EST 2014 | grimus
Hello, I'm fighting with problems of random solder balls that appears after reflow soldering around Pin in Paste component. I'm mounting this component with Pick and Place machine. I'm using solder paste type-3 and this is lead free product. This is
Electronics Forum | Sat Nov 15 05:08:45 EST 2014 | grimus
Same side (component side) if You give me e-mail I can provide You more pictures. I'm making one stroke with same speed (I'm using closed proflow head and DEK printer). 5 mils thickness stencil. Products requirement - 3 IPC Class (75 % and more fill
Electronics Forum | Wed Nov 19 19:06:42 EST 2014 | spoiltforchoice
Plenty of people don't like cut 'n clinch and might appreciate just having the cut part. We do a mix of OEM and CEM work, because of the low volumes special tooling for a product is often out of the question so that is one thing to consider. We use t
Electronics Forum | Fri Nov 21 11:00:27 EST 2014 | gregp
Hi J_Dub (Joe), Thanks for the input. Sounds like some fairly densely populated through hole assemblies. 100 solder joints per board is up to 50 parts per board (I know you may have DIP's so it could be less than 50). 24 boards in a panel x 50 par
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477