Electronics Forum | Wed Mar 20 14:54:15 EDT 2024 | linux
Vacuum Low, Shows up on changeover when the head picks a different size nozzle, remove mesh filter, unplug the clear pipe from the top of the head, put a small amount of alcohol down the pipe and blow it out with the air gun, You should check for a h
Electronics Forum | Tue Apr 02 17:56:44 EDT 2024 | mistrthou
You'll need the specific Mydata part. It has some specific dots and square printed on it. It should be in a box with other calibration parts, stuff which we do at least every 6 months. I attached an internet picture of the box that contains the diff
Electronics Forum | Thu Apr 18 18:34:33 EDT 2024 | ahernand75
Hello SMTnet, I would like to know from you guys your experiences of how the use of X-Out boards impact your units per hour on your lines. There are different scenarios where some of you might have only one lane reflow oven and others may have 2 lane
Electronics Forum | Tue Apr 23 15:19:35 EDT 2024 | tey422
The impact of course is a lot less for newer PnP, but for older machine there might be different story. What if the bad marks not being read correctly? The result would be "good" board being skipped, while "X-out" being loaded. That would waste mu
Electronics Forum | Wed Dec 20 22:24:03 EST 2000 | Greenman
Dave: In terms of heat transfer, air is 78% nitrogen, and the remainder is mostly (20.9%) oxygen (roughly the same molecular weight as nitrogen), with a bit of argon (0.9%), CO2, hydrogen, monosodium glutamate etc. So you would expect virtually no d
Electronics Forum | Wed Dec 20 22:25:26 EST 2000 | Greenman
Dave: In terms of heat transfer, air is 78% nitrogen, and the remainder is mostly (20.9%) oxygen (roughly the same molecular weight as nitrogen), with a bit of argon (0.9%), CO2, hydrogen, monosodium glutamate etc. So you would expect virtually no d
Electronics Forum | Wed Dec 20 22:26:01 EST 2000 | Greenman
Dave: In terms of heat transfer, air is 78% nitrogen, and the remainder is mostly (20.9%) oxygen (roughly the same molecular weight as nitrogen), with a bit of argon (0.9%), CO2, hydrogen, monosodium glutamate etc. So you would expect virtually no d
Electronics Forum | Thu Sep 16 20:27:52 EDT 1999 | Dave F
| I have a number of hopefully easy questions: | | 1. Are there significant differences in the ease of change-overs and set-up among different equipment manufacturers? For example, are Siemens Siplace machines truly more modular than others? | 2.
Electronics Forum | Thu Sep 16 21:28:44 EDT 1999 | JAX
| I have a number of hopefully easy questions: | | 1. Are there significant differences in the ease of change-overs and set-up among different equipment manufacturers? For example, are Siemens Siplace machines truly more modular than others?
Electronics Forum | Fri Sep 17 06:07:52 EDT 1999 | Earl Moon
| | I have a number of hopefully easy questions: | | | | 1. Are there significant differences in the ease of change-overs and set-up among different equipment manufacturers? For example, are Siemens Siplace machines truly more modular than others?
