Electronics Forum | Wed Feb 05 18:02:10 EST 2020 | nedori1907
do you have any ideas avoid them from sensitive comp.?
Electronics Forum | Wed Jul 14 05:21:05 EDT 2021 | kojotssss
IPS ring and led's should clean every 160 Hours (weekly) to avoid dust on the head.
Electronics Forum | Tue Jun 07 20:17:09 EDT 2022 | SMTA-64387182
Understood, Thanks, Joe
Electronics Forum | Thu Jul 05 08:11:45 EDT 2007 | naynayno
This is wave soldering process and design question since most folks associated with SMT are processing mixed assemblies. We have a 3-leaded sensor (radial) with such a tight pitch always bridges. Solutions unders disussion are pre-forming and addin
Electronics Forum | Thu Oct 30 09:15:20 EDT 2008 | kingshar
Hi, Hi, 1) Can anyone tell be what is the acceptable manufacturing tolerance from stencil to PCB . 2) what are the methods we can avoid that. 3) What is the method to avoid PCB shrinkage. 4) How can we correct shrinkage 5)Is there any standard gud
Electronics Forum | Sun Nov 10 09:58:38 EST 2013 | kumuda
We have been using a circuit board in the assembly of HV Tank used in X-ray generator. This board acts as a sealant to the oil tank opening. The top side area of the board which comes in contact with oil is conformal coated to avoid oil leak. However
Electronics Forum | Wed Mar 21 04:42:54 EDT 2018 | rob
Although if you do many double sided boards you will want to avoid having to constantly fit boards with unreflowed components on into jigs, as there is plently of opportunity for defects. It's fine on the odd board, but doing it a lot is something t
Electronics Forum | Fri Jun 15 12:12:34 EDT 2007 | realchunks
Hi Ed, It all depends on more info needed. How many preheaers do you have in your wave? One, two, three? Are you talking bottom side preheat? What size boards do you run and what type of parts are on it. Typically, preheat does several things; w
Electronics Forum | Wed Jan 31 10:56:23 EST 2018 | dontfeedphils
I'm working on bringing up a new conformal coat process/workcenter and have a few questions I'm hoping someone might have experience with. Right now we're manually spraying both coating materials (1B31 and 1A33 from Humiseal) using HVLP guns. I run
Electronics Forum | Mon Oct 18 09:41:56 EDT 1999 | Wolfgang Busko
That should not happen. There are some threads concerning BGA and wavesoldering you could look for. It�s said that you should protect the vias in the BGA-area by soldermask or at least with tented vias to prevent rereflow of BGAs solderjoints what co