Electronics Forum | Fri Aug 19 05:20:40 EDT 2011 | kemasta
Hi! I am searching for a glue type which use for security purpose. The glue must not able to rework after full cure and fast curing time (within 5~10minutes). I have some sample in hand, but it seem quite expensive considering the volume that I am
Electronics Forum | Wed Aug 09 09:54:36 EDT 2006 | russ
Use ENIG, plated finish will be too thick and make for a brittle joint. ENIG is self limiting so this condition cannot be present. To ensure that the bond is strong for BGA you must ensure that process is under control. The correct reflow profile w
Electronics Forum | Thu May 11 11:25:56 EDT 2017 | davef
Key to Rosin Fluxes [from SUPERIOR FLUX & MFG. CO.] Type R (Rosin): Non-activated rosin flux for soldering copper. Residues are non-corrosive and non-conductive. Type RMA (Rosin Mildly Activated): Mildly activated rosin flux that contains no chlori
Electronics Forum | Tue Mar 14 03:57:43 EST 2006 | Base
Hey Peter, Did some simple math... 800.000PCB's x 20cmp = 1.6million placements 8hrs/day * 22 days/month = 176 hrs You're looking at over 90kCph fulltime! I'd say go with an AX-5 as JAX suggested. Given the product you described you could reach s
Electronics Forum | Sat Oct 25 19:02:45 EDT 2003 | Gabriele
Main difference is the reel holder position and for sure the clamping pin location. Tape feeding system is different. Any way they cannot be compatible among them. Q type feeders must be used for MV Q-Type placer and K-type feeders must be used for M
Electronics Forum | Thu Apr 28 09:01:38 EDT 2022 | saberbouras
I have a solder paste fridge; my question is what is the type of this connector so I can use it to attach a warning light. And is it a power source or is it a dry contact relay output?
Electronics Forum | Thu Apr 28 11:58:23 EDT 2022 | saberbouras
Thanks it's a 6 pins there is a hole on the bottom but it doesn't seem to be a pin, it's just a hole.
Electronics Forum | Wed Sep 01 13:42:28 EDT 2004 | cmiller
We use a small DI water generator feeding a diaphram type pressure tank going to a standard dishwasher. We have some filters in-line also to prevent white residue on no-clean boards. I cant think of a good reason to buy a $5,000 board cleaner rather
Electronics Forum | Fri Aug 15 22:05:04 EDT 2008 | proy
I am looking for a nice way to print labels, say 1/2"x1 1.5" which I can place on a feeder or IC tube and remove easily later. I am going to set up a laptop on a cart with a small printer and write scripts for my MRP database application so the opera
Electronics Forum | Wed Aug 09 15:51:27 EDT 2023 | oxygensmd
Hi! I have just checked in my same oven after a blower-defect. You need Carlo Gavazzi EC3016PPAPL-1 sensor. You can find a link here about the sensor, use it as reference: https://us.rs-online.com/product/carlo-gavazzi-inc-/ec3016ppapl-1/70014680/ It