Electronics Forum | Mon Oct 11 12:29:01 EDT 1999 | John Thorup
| We have three buckets filled with leftover solder paste from our screen printing process. Kester has informed me that they no longer take paste, but only dross and pot dumpings. Does anyone know if there's someplace I can recycle this, or am I go
Electronics Forum | Tue Mar 27 19:58:13 EDT 2007 | colormaker
I have only used the Quad 4C, We bought it used and ran good right out of the box without the need for repairs. It uses quadaline and does not work very well on IC's. We place 30K 1206 parts a week with a 4 % dump to bin. I have to tolerance set to 3
Electronics Forum | Wed Mar 28 20:35:52 EDT 2007 | darby
Quadalign is very similar to the Samsung. I would think that 4% dump on 1206 or even IC is way over the top. If you are certain that your component data is correct; I suspect that your z-axis centring height may be out of whack and that you are eith
Electronics Forum | Thu Aug 10 21:59:14 EDT 2000 | Dave F
Pascal: Two elementary cautines are: 1 Don't dump the board before the reflowed solder is cooled. 2 Try to manage the side to side temperature variations in your oven. I wouldn't be surprised to see 5�C variation. Good luck
Electronics Forum | Mon Sep 14 21:03:15 EDT 1998 | Steve
When I search using the new product to company directory, I can't find companies that I know were in the older directory. What did everyone get dumped and they just haven't found-out and re-registered yet? Dave F
Electronics Forum | Tue Sep 03 14:34:39 EDT 2002 | dragonslayr
All valuable insights are provided by the other posters to this thread. I'd like to add a bit more, if I may. Being environmental friendly is a must. I would not advocate dumping toxic metals to the sewer. In a past worklife, a steel mill, I was r
Electronics Forum | Tue Oct 07 15:45:33 EDT 2003 | adlsmt
I believe NEA still sells new UP500's for around $45K. I think MPM dumped them all there and pays them as they sell. Is it worth looking at if the software is upgraded? I had the general opinion that the hardware was not so hot.
Electronics Forum | Mon Apr 19 15:19:34 EDT 2004 | wgaffubar
I have seen problems when printing below 18% with our paste. We use a swamp cooler to dump moisture back into the room. It usually get to about 28% and the printing issue disappear. arcandspark
Electronics Forum | Tue Aug 17 13:23:14 EDT 2004 | cyber_wolf
We have the same machines and same software. We have not seen this problem. I agree, sounds like your hard drive is taking a dump.
Electronics Forum | Mon Nov 15 23:34:53 EST 2004 | KEN
I have had this problem on tant-D's. Do a memory dump. Re-transmit status and proper. May help....may not. Also, is this the last mount?
