Electronics Forum | Fri Aug 13 10:19:35 EDT 1999 | Boca
| | We are using a mixed technology process with mostly through-hole parts plus some SMT IC's on the component side and some passive SMT parts on the solder side. We do not have a proper wave soldering machine for doing solder side SMT (double wave
Electronics Forum | Mon Feb 23 23:50:18 EST 1998 | mike
| Does anyone have any experience with via in pad for | BGAs using conventional thru hole technology? | Steve Joy Steve, I had a customer who had designed a board to use a BGA socket. Well the socket did not work out so we then placed the bga dire
Electronics Forum | Tue Dec 29 03:37:09 EST 1998 | John W
| can some kind of through hole type connector pass through | the smt process (with IR technology)???? | the temperature factor or material factor????? | There's a company called Samtec (web site is www.samtec.com) who can provide these.They have a
Electronics Forum | Fri Jul 03 09:29:19 EDT 1998 | Dave F
| Hi all. | I am trying to put one 20 pin thru hole connector along with the smt components on the PCB. I would appreciate if somebody can guide me in getting thru this process. I also need to know how much bigger the holes on the screen or stencil
Electronics Forum | Wed Feb 09 22:08:45 EST 2000 | Dave F
Russ: You've got stop soft-peddling this stuff. This doesn't sound like "poor solderability." It sounds like "no solderability." It also sounds like you�re dead meat. Three places to call: 1 Board supplier to get their suggestions on unsolderab
Electronics Forum | Wed Oct 13 06:20:00 EDT 2010 | costache
Dear All > > I need to check the solder paste > volume inside the PTH at our board,which size is > 440x620 mm.So, I may need 3D inspection > machine,AXI, not AOI.So, does anyone recommand me > which 3D machine is suited to my PCB? Thanks in > a
Electronics Forum | Thu Jun 20 16:59:57 EDT 2002 | davef
We look at gluing and pasting second side components as two different processes, NOT alternative processes. Given our drothers, we'd paste / place / reflow all day long, before we'd want to glue. We glue because we have to glue. The main driver to
Electronics Forum | Fri Jun 15 09:13:53 EDT 2001 | jackofallprocesses
Does anyone have knowledge or experience with Pin & Paste on boards that are .095" thick? The boards would have mixed technology, PTH, fine pitch, and BGAs. I did a search for this info and nothing touches on this particular subject, thicker boards.
Electronics Forum | Tue May 12 04:15:48 EDT 1998 | Chris Sargent
Help! We have been doing some trials on Paste Through Hole and have encountered a problem. The screen is designed (as is suggested in technical info re PTH) to give double the paste volume required to fill the void between the pin and via. The pro
Electronics Forum | Tue Oct 13 15:38:23 EDT 1998 | Dave F
All Y'll How do you clean components that must be added to an assembled board after water wash? BACKGROUND Our basic process goes like this: 1 Print paste with OA flux, place, reflow, wash 2 Repeat 1 3 Insert PTH, OA flux, wave, wash 4 Insert