Electronics Forum | Fri Feb 23 11:29:02 EST 2024 | carl_p
Would you be able to post an image of the joint in concern? Sounds a good problem to resolve. Guessing you have used an external profiler & not the oven built in type? If 100% certain the profile is correct I would focus on the paste from my exper
Electronics Forum | Fri Feb 23 17:26:07 EST 2024 | mistrthou
The only company I've heard of that has parts and perhaps service is https://tmsolderingsolutions.com/#section2 I have not used them myself. My brother has ordered some minor parts from them with success.
Electronics Forum | Thu Feb 29 02:48:52 EST 2024 | redspare1
I'm not 100% sure, but I think they might have shared parts with some models of fein focus and X-TEK. If you do a bunch of google image searching you might find a similar looking tube to what is in your machine. I do know the filaments in some dag
Electronics Forum | Fri Mar 08 15:23:15 EST 2024 | tommy_magyar
They have a software called JaNets to do that. I only briefly worked for a couple of months with Juki, but JaNets did what you are asking for. Most likely you will need licence from Juki for that. Regards, Tom
Electronics Forum | Tue Mar 19 12:24:16 EDT 2024 | carl_p
I wouldn't focus on the brands at all. you want the best features that meet your needs by the sounds of it. Koh young will be able to do a feedback loop to your current machines as well as their own brand. Maybe look into the reps of theirs in your
Electronics Forum | Tue Mar 19 14:34:51 EDT 2024 | grayumm
Yeah, I agree with you. We do the same but Wrong Text inspection is something they have told me we would remove for two years now, but they still won't let me pull the trigger on it. Mainly because our line workers still place wrong reels or mislabel
Electronics Forum | Wed Mar 20 12:28:40 EDT 2024 | poly
The Fuzion HC will do that many parts depending on the tape width. 8mm is dual per lane, big ones can take up a lot of lanes. Our boards have that many parts and I use two machines (gx11 and a gc30). I think the Panasonic is probably a better option
Electronics Forum | Wed Mar 27 12:33:55 EDT 2024 | ttheis
Go used. We have quarter million dollar UIC machines we bought for $10k and they are amazing. Just need to be able to read manuals and be resourceful without factory support. There are independent service companies if you need help. Overall its been
Electronics Forum | Thu Mar 28 15:18:21 EDT 2024 | tey422
From the error message, might have to do with the "Z"-axis. You didn't mention you redo the calibration or not, then you should run that too. My guess would be "Z reading maybe slightly off". BTW, last time I work with those Mydata machine were bac
Electronics Forum | Thu Mar 28 18:00:31 EDT 2024 | alexv
The tapping noise is what you hear when Hydra taps each tool on the tool bank to make sure the tips are seated well. The error is a Z-motor problem. The gear is at the top of the Hydra and needs grease. Have you cleaned the old grease and applied new
