Electronics Forum | Tue Feb 01 16:56:46 EST 2022 | rstellema
Hello all, I have a couple of old FUJI CP-6 SMT placement machines that are operating with very old PCMCIA Flash Memory cards. I would like to insure that I have back-ups should the memory cards fail. I assume that I would need a support USB reader/w
Electronics Forum | Fri Feb 18 20:53:36 EST 2022 | emeto
From part documentation: CLEANING INSTRUCTIONS A no clean solder system is recommended for IHLP's. If cleaning must be performed, an Isopropyl alcohol is recommended. If de-ionized Water Wash is used insure it is followed by a thorough warm air dry c
Electronics Forum | Fri Jun 09 16:01:27 EDT 2023 | atpico
Does anyone has any information about MY500 End Of Life and Spare parts availability? Are MYCRONIC MY600 cartridges backward compatible with MY500 ? Does these machines wear well? General reliability opinions? Thank you in advance. Hello again, f
Electronics Forum | Thu Jun 29 03:04:19 EDT 2023 | ttheis
The first thing we do with all machines we buy is back them up. First we backup the calibration info, then we remove the hard drive and image it to our server. If the hdd dies, we can restore it to a new one. Look on eBay for new-old stock on the har
Electronics Forum | Sun Oct 22 13:52:40 EDT 2023 | protokos
> This will be a problem as the calibration <BR> > settings are stored per machine in the <BR> > Application Support folder. You will also need to <BR> > know what the last firmware you were running as &l
Electronics Forum | Thu Feb 15 03:25:44 EST 2024 | ttheis
We always image the hdd on any machine in case this happens. Then you just need to buy an hdd and write the image back. If you just need a new hdd I would look on ebay for the part number or a compatible alternate. You can even find new old stock a
Electronics Forum | Fri Jun 01 16:22:35 EDT 2001 | davef
Your supplier�s approach to managing process change is TOTALLY UNACCEPTABLE!!!! Now, let me get the froth back in my mouth. How in the world do we know if the residues on these "no-clean" boards are compatible with your product? J-STD-001C, para 4
Electronics Forum | Tue Aug 10 07:47:12 EDT 1999 | Brian
| | | hello to everybody, | | | we have a really satisfactory no clean process, both smt/reflow and wave soldering, but we get troubles with defects rework; | | | does anybody know how to eliminate flux residues or how not to produce them during rew
Electronics Forum | Tue Aug 10 20:22:15 EDT 1999 | Wayne Sanita
Hello, Could be that touchup operators are using too much flux. What are you dispensing flux with. Disposable or refillable flux pens are good to have around. | | | | hello to everybody, | | | | we have a really satisfactory no clean proc
Electronics Forum | Sun Mar 07 09:35:03 EST 1999 | Scott Cook
| Where I'm located, we call it OCC. By any other name would it smell/stink as sweet? | | I need to know, though it's been overworked, who has experience with OSP and its compatibility with water and IPA no-clean, VOC no-clean, and device adhesives
