Electronics Forum | Thu Nov 09 13:26:08 EST 2000 | omar_verdugo
Somebody can help me with this problem.I already have installed the version of fujicam 1.2 but the machine interface that come with this don't work propertly this have a little problem with the rotation of theta is not the same with the theta assingn
Electronics Forum | Wed Nov 08 20:18:26 EST 2000 | Dave F
The style of US standards has been moving away from such specifications for some time. So, the approach has become ... Here�s what I want ... Functioning, built to print, clean, undamaged boards. Here�s how I want you to do it ... I don�t care, jus
Electronics Forum | Wed Nov 08 15:32:45 EST 2000 | CAL
ACI offers solderability restoration services by using Reduced Oxide Soldering Activation (ROSA) technology to remove the oxide layers from circuit boards or components and then re-tin or otherwise coat them to maintain a solderable surface. The R
Electronics Forum | Thu Nov 09 03:19:40 EST 2000 | Chris May
Cristiano, Are your oxidised components now all on boards ? How many and how many terminations ? If you have any that are still to be used, maybe you can get the supplier / customer to replace them, unless of course they are well old. If you have
Electronics Forum | Tue Nov 07 23:27:31 EST 2000 | gary
What�s the best storage method in controlling SMT parts ? Currently we get all the parts from our stores for certain jobs and stock them in our Reel Racks with their designated part numbers. When they�re in SMT area they all get mixed up with some of
Electronics Forum | Wed Nov 08 15:59:19 EST 2000 | jackofalltrades
We are currently evaluating a "selective soldering machine" from Ersa. We have been using it for about a month or so now and have found it to be very useful on "difficult to wave solder spots", but it is not as fast as a wave soldering machine. It mi
Electronics Forum | Wed Nov 15 06:44:54 EST 2000 | andy
John , I had some experience of selective solder in a high throughput environment and though the quality of s/s was good , the throughput was not . So if throughput is an issue , forget it . I would go with the hand-solder option , although as has be
Electronics Forum | Tue Nov 07 09:21:27 EST 2000 | jackofalltrades
We see this type of problem with a couple of our boards. It has proven to be a problem with the board. During manufacture at the board house the thru holes for the connectors are plated a little too heavy causing a smaller hole. If you haven't alread
Electronics Forum | Tue Nov 07 11:14:11 EST 2000 | Adam
There is a variation on the pins that come through on the other side. The pins that are deforming are roughly half the size of those which aren't deformed.There are no witness marks on the pins that are deformed, suggesting that the pins aren't fouli
Electronics Forum | Mon Nov 06 16:27:48 EST 2000 | Boca
Bingo! Sounds like you solved your mystery. You've checked your key process steps, the product has been running in your processes for some time with no process changes. This all points back to one of your process input, i.e. the fab. Experience s
