Electronics Forum | Wed Sep 13 15:54:53 EDT 2006 | Osvaldo Smith
Hello, I am trying to find some Programming and host manuals for the following Panasert and Sony machines: MSH-G1 (Panasert SMT) RH2 (Panasert Through Hole) RH3 (Panasert Through Hole) RH5 (Panasert Through Hole) JVK (Panasert Through Hole) AX (Pan
Electronics Forum | Sun Sep 24 09:40:33 EDT 2006 | davef
Roland It's nice that Peter is considering improving the site. Things we'd like to see improved on SMTnet.com are: * SEARCH that works effectively. [We can't find postings that we've made. AND we know the key words. So, it must be painful for oth
Electronics Forum | Mon Sep 25 16:31:41 EDT 2006 | SWAG
We are just getting into full production on a handful of lead-free builds. We are finding that the specific lead-free paste we are using is very susceptible to shelf life and dwell time. Much, much more than our experience with leaded. We have had
Electronics Forum | Sat Oct 21 20:53:15 EDT 2006 | Ola
Of course. It has a dynamically programmable PLC. This means that you can program it into virtually whatever you want it to do, as long as it is within that particular conveyour specification. JOT doesn't normally give this "s/w manual" and "the han
Electronics Forum | Tue Oct 10 12:32:08 EDT 2006 | RLM
Larry, I have had this problem in the past. It turns out that there wasn't enough "Z" on our nozzle pickup locations. When a nozzle change occured the nozzle would not be fully seated on the Z-rod. When the Z-rod is driven down to pick the first part
Electronics Forum | Tue Oct 17 11:51:23 EDT 2006 | SteveT
where I can get an install disk for a Comtrol RS232/422 Interface controller? We're upgrading a PC and I need to move the controller but obviously this thing isn't going to be plug n' play, or even plug n' pray. I'm assuming there is one because I c
Electronics Forum | Tue Oct 17 17:27:08 EDT 2006 | adlsmt
Define "pretty easily". Did anyone ever do whatever is making them fall off now before? In most casses where a component "falls off" then someone implements a totally subjective test to make sure the rest of the parts wont "fall off" they damage a lo
Electronics Forum | Thu Oct 19 08:54:39 EDT 2006 | df
thanks for replies guys. I have a nearly Full RoHS Compliant bom with 1 device non-rohs. It is a soj28 device rated ( as best as I can find out at 225degC) Production are screaming for these boards - I put a thermocouple on the part and it hits 23
Electronics Forum | Fri Nov 17 07:58:06 EST 2006 | markb
SWAG - I also forgot to mention a few things. Our delmaination was always between the large copper plane and the laminate. It is a multi-layered board, so even when the delamination appeared around components (through visual inspection), cross-sect
Electronics Forum | Fri Oct 27 11:44:05 EDT 2006 | billyd
Hi guys. I'm hoping maybe some of you can help me with some information today. I'm looking to find out "ballpark" how much a decent board washer would set me back. The one I currently have just isn't doing the job the way I want it. It seems to have
