Electronics Forum | Wed Jul 11 06:14:21 EDT 2018 | uzbek
Hello, we are currently designing one device that needs shielding. Under the shield, there is one BGA chip and 0402 components. Now we have a dilemma whether we should go for a one-part shield or two-part shield. We talked with several EMS companie
Electronics Forum | Thu Aug 16 08:15:04 EDT 2018 | muzzy
Hello! Does anybody know how to access the "MS Parameters" window on older JUKI Pick and place machines? (mainly on 730, 740, 750, 760). Service manual mentions that it is possible to change all of the mechanical parameters from there (like for examp
Electronics Forum | Mon Oct 15 02:34:17 EDT 2018 | directx995
@Reckless on GI14 machine, we have around 90k picks per week. About maintenance I rly can not say, since I'm head of programming and not maintenance. But as far as I know GI14 is rly complex just as @Comatose said, but it is much different then GC6
Electronics Forum | Tue Oct 30 15:04:36 EDT 2018 | SMTA-Shafiq
Steve, Part numbers with the same specification are not part of the same BOM. Scenario is, SMT Line #1 builds Products X, Y and Z Product X has a part number #1 that is a resistor with 50 ohm value and a power rating Product Y has a part number #
Electronics Forum | Thu Nov 22 02:10:39 EST 2018 | robl
Probably just evolved - just different needs at different times. Back in the day for example there were lots of patents around turrets so different manufacturers went different ways. These have mostly run out now, so different technologies call for
Electronics Forum | Wed Feb 13 11:23:14 EST 2019 | aldrich17
We have several issues with components placing properly onto designated leads without having to offset our boards fiducials before population. For several of our boards, we cannot set our fiducials "dead center" but rather offset them in various dir
Electronics Forum | Thu Mar 21 16:50:10 EDT 2019 | emeto
Hello, I've done it before in Excel and it is a very simple concept. Inputs are board size, numbers of SMT and TH process sides, number of SMT and TH placements per side, boards per panel and quantity of boards to be produced. Output will be calcul
Electronics Forum | Wed May 01 12:33:36 EDT 2019 | cyber_wolf
Depending on what you are doing, feeder cost usually outweighs the price of the pick and place machines. I have worked with almost all of the Fuji CP turret machines. I haven't touched any of the new stuff but I have seen it in person and it is impr
Electronics Forum | Thu Sep 19 16:58:45 EDT 2019 | kylehunter
So.. I thought I had fixed the issue, but it seems not. The issue that was causing the fiducials to not be found, I 100% have solved. The board was not reaching the stopper before being clamped, causing the board to be a few mm's offset. I added a de
Electronics Forum | Mon Jan 13 08:35:51 EST 2020 | griinder
The holes are calibrated in MSetup. Generally, I have never had luck using the auto teach for the nozzle changer. We would teach them each manually. Before doing this, you need to narrow your issue down a bit more. Which head gives you this error?
