Electronics Forum | Sat Feb 12 18:35:56 EST 2011 | gabriel1blue
Thank you, that works perfect!! Now I was able to set up the offset's and program the machine, but now head #1 will move to the feeder location but it will not move down to pick up the part, then it moves to the drop area, but its only happening on h
Electronics Forum | Wed Feb 16 00:57:44 EST 2011 | gabriel1blue
Thank you guys for your help I was able to get the machine running on all the heads and now I can at least run my boards, I have another question is there a way to have the camera move automatically to the location on the program or to do a search on
Electronics Forum | Thu May 28 21:13:09 EDT 1998 | skhun
| Our company is currently looking to implement a SMT production line. What I am looking for is feedback on people's experiences with various machines. | Here's what we are in the market for: | Low/Mid volume 3,000+cph machine that can handle high j
Electronics Forum | Mon Nov 12 13:04:35 EST 2001 | slthomas
We've got a problem with a fine pitch board that has about .005" registration error at each end (towards the center of the board) when it's printed. Apparently we've got a case of board stretch generated at the fab shop. I still have to do some mea
Electronics Forum | Thu Sep 22 10:48:08 EDT 2005 | Rob
Cheers Greg, It's unusual to have such direct access to manufacturers & their opinions. I'll tell you what really does get us, and splicing doesn't work well on these occaisions - big SMD connectors, requiring deep pocket feeders. You only get m
Electronics Forum | Fri Aug 22 15:27:13 EDT 2008 | wayne123
this is the order that I use. 1. Teach pcb origin 2. Teach fiducial location 3. dial in vision on fid in mark info. 4. go into mount and verify that the primary image is on in x/y (after perfoming a teach trace condition) and then do any offsetts if
Electronics Forum | Wed Dec 24 11:23:22 EST 2008 | childs
I can't seem to locate any information/concerns about moisture entrapment in IC packages on the promary side in a double sided SMT assembly using water soluable solder paste when soldering the second side. A typical process would assemble/reflow/cle
Electronics Forum | Fri May 15 10:12:21 EDT 2015 | capse
I'm the Rep for Vitronics Soltec and ASYS EKRA in the southeastern US. I suggest you take a look at Vitronics ovens. The AutoSet feature makes new profile development as easy as possible without buying a third party accessory, The new EKRA user inter
Electronics Forum | Mon Nov 12 16:14:47 EST 2001 | davef
Yes!!! How can we assemble boards with 20 pitch when we allow 0.008� error to the master art? Excellent question!!! IPC-D-300G has nothing to do with assembler requirements. It is written by and for fabricators, so that they can be comfortable.
Electronics Forum | Wed Sep 21 12:30:03 EDT 2005 | Rob
Hi Greg, We've used lots of machines over the years & seen lots of different tape related issues - the main one being snap off of the cover tape, usually due to too much glue, over entusiastic heat seal, or a feeder requiring maintainance. Also the