Electronics Forum | Tue Jul 25 12:59:02 EDT 2023 | markhoch
You should also check out 4 Tech Electronics located in Webberville MI. Dan has many years of UIC knowledge and has completely tore machines down to the frame and rebuilt them. One of the most knowledgeable UIC Engineers in the industry. 4techusac
Electronics Forum | Wed Jul 26 02:15:31 EDT 2023 | frankchan
Let's not forget the valuable space SMT workshop cost a lot, even the floor it's ESD material coated.AGVs need a runway for the route Also, there's the cost/profit ratio... ...
Electronics Forum | Mon Jul 31 09:59:32 EDT 2023 | leeg
Anyone had any history of using these as a SMD ? We have just started to get PCBA's with these on and are having mixed results with alignment and the soldering of them.
Electronics Forum | Mon Jul 31 18:22:03 EDT 2023 | emeto
Complexity and volume are the main items in consideration. If you build automotive. they probably won't accept manual inspection only. They will require full automated traceability and 100% automated product inspection plan, before they hire you.
Electronics Forum | Mon Jul 31 18:34:30 EDT 2023 | emeto
I have done some of these. Pin in paste process with generous amount of paste to fill the barrel properly. Pick and place process is tricky too, but if you get them on tape and reel, you can have a custom nozzle and have them placed.
Electronics Forum | Mon Jul 31 18:41:07 EDT 2023 | emeto
Chip-bonder glue(Loctite 3612 for example) will harden at lower temperature way before paste goes to liquidus stage, so it will hold the part in place.
Electronics Forum | Mon Jul 31 19:47:50 EDT 2023 | emeto
Small companies or startups will probably test boards themselves in HLA stage to save money in production. If this is customers you are dealing with, should be part of your contract, that functionality will not fall in your bucket as there is no func
Electronics Forum | Tue Aug 01 06:24:31 EDT 2023 | simonr
@srikant I'll check their process, meanwhile thanks for the reminder to put fiducials nearby. @MagyarT and Evtimov it sounds like it should work OK, the machine specs are 35um (3 sigma) so the results will be interesting, will post when I get some d
Electronics Forum | Tue Aug 01 08:19:10 EDT 2023 | shrikant_borkar
you are welcome, don't forget to set the search window (Fiducial Mark if 1D. then the search Window is set to 3D). Please reply once you have done.
Electronics Forum | Tue Aug 01 15:39:10 EDT 2023 | ushir
Good Day Would anyone be able to kindly assist with the install files for the Easy Coat (ECXP) Software used on an Asymtek C-740. Our PC crashed and we are trying to reinstall. Thanks!