Electronics Forum | Thu Mar 25 13:52:36 EDT 2021 | ephan
I bought this printer from a third-party source. The machine was running well until one day when we tried to turn it on and the screen just came up blank (I already checked if it was a monitor problem). Does anyone know why this happened and how to f
Electronics Forum | Thu Apr 01 05:19:04 EDT 2021 | micropak
Thanks for the tip. I have the old belt and since it is too damaged (Steel wires showing up here and there)that measuring the length is probably not possible. I can however measure width and tooth pitch. I will give it a try. I have also requested A
Electronics Forum | Mon Jul 05 11:16:50 EDT 2021 | aurash
Not sure if you fixed the problem in the meantime but try to disable the Z4 head to see if the problem actually belongs to the 4th head. Sometimes a totally unrelated problem is manifesting on the head. (I had communication problems between the XMP c
Electronics Forum | Wed Apr 14 14:28:32 EDT 2021 | lpbro
My first move is inspect the blades, swap the blades around and re-balance the blades to see if it is a problem that corresponds with a specific blade. Also try a different pair of blades. Full restart on the printer incase of an odd software problem
Electronics Forum | Wed May 05 14:51:12 EDT 2021 | spoiltforchoice
except the machine in question is a Chinese desktop crapbox with drag feeders... You could try asking the question on eevblog, someone else there might have one and have solved a similar issue. the reality is tho' you will get all sorts of issues l
Electronics Forum | Mon Jun 07 23:39:00 EDT 2021 | glasscake
Never mind I reread your question and realized my mistake. Your best bet is just to either get more labor to rework and up your output that way or to make a custom machine that has the hot air nozzles fixtured and timed. Then load up multiple boards
Electronics Forum | Mon Jul 26 20:40:48 EDT 2021 | stephendo
Software makes a huge difference. Try a different barcode reader app and see if you can find a better one. With data matrix the bar code can be mostly a bunch of blobs as long as the outside is reasonable good. Then the reader only needs a few pixels
Electronics Forum | Wed Jun 16 08:16:27 EDT 2021 | shmevan91
Hi, Could anyone shed some light why a mk5 13 zone heller ovens rail width won't auto adjust? has to be done by hand every time we change product. The board support rail will adjust just not the main rail, have tried swapping the two cards around bu
Electronics Forum | Sun Jun 27 21:10:07 EDT 2021 | damiendigilin
We changed the encoder because the ribbon cable is soldered to the board. Both encoders seem to be working correctly beep tested the cable. We have tried different size components 0603,0805,1206 and different boards. It will place about 3 to 5 com
Electronics Forum | Thu Jul 01 13:21:54 EDT 2021 | tanderson
I'm trying to find clear tape (8mm, 12mm, 16mm widths) and clear plastic leads to use with opened reels of components. A former supervisor provided some but I don't know where he got them from. Any suggestions on a source for these? I attached a pic