Electronics Forum | Wed Apr 26 09:48:32 EDT 2006 | patrickbruneel
Checkout this link http://www.rohsusa.com/ any comments on this??
Electronics Forum | Thu Dec 27 11:05:40 EST 2007 | realchunks
5 or 6 mil thicjk stencil and no reduction.
Electronics Forum | Fri Dec 28 17:02:04 EST 2007 | davef
We agree with Chunks
Electronics Forum | Tue Sep 30 13:55:37 EDT 2008 | realchunks
How do you normally solder it?
Electronics Forum | Thu Jul 15 09:34:24 EDT 1999 | John Sims
I'm looking into vision inspection equipment to automatically inspect SMD placement and solder joint quality. Does anyone have any recommendations or know of any commonly used equipment? Do other manufacturers use vision systems at their inspection
Electronics Forum | Thu Feb 04 09:09:07 EST 1999 | dave
Can anyone help me with the pros and cons of trying to wave solder tantalum and large (1812) ceramic capacitors. I do know that one may see fractures on larger cermaic caps, but have not seen much on the tantalums. Any insight as to what problems I c
Electronics Forum | Fri Oct 12 08:19:12 EDT 2007 | davef
Michael We know you're just trying to have fun by getting us to respond. Going along with the game, if your solder is more expensive, requires more energy to melt, produces less reliable solder connectiuons, and is worse for the environment; how to
Electronics Forum | Mon Jul 29 08:34:40 EDT 2013 | gallionc
I don't see an issue. As was mentioned before, it is what the customer wants. You could approach this from one of two ways. You could simply install the parts, clinch the leads on the opposite side for added mechanical strength and solder the parts
Electronics Forum | Wed Jul 17 09:40:33 EDT 2013 | proceng1
I have a CM project that is a single sided pcb (not plated thru holes) and I have 3 axial resistors that the Customer wants placed on the "solder side" of the board. I cannot find an IPC-A-610 reference to putting parts on the wrong side of a single
Electronics Forum | Fri Jul 08 09:57:31 EDT 2005 | fctassembly
Proy, Another issue is what exact formulation of SAC is used. Much of the SAC305 being used in Asia contains phosphorus, which is added in an attempt to reduce the heavy drossing that SAC305 produces. Phosphorus acts as a flux on steel so will increa