Electronics Forum | Mon May 03 08:09:04 EDT 2010 | Jeff
Power up your machine and look at the vision card. If it has a red light then there is a problem with it. 20k is way to much to spend to fix this. I've sent out two cards for repairs in the past and got them fixed for $2200 each. If you want more inf
Electronics Forum | Fri May 14 02:04:16 EDT 2010 | dilogic
Sorry for not clearing that out - it's not the problem of lost vision sw. - I even can't connect to it in diag. mode. Must be some hardware issue. I've checked video outputs with the scope and instead of constant freqency ~15kHz, it drifts up and dow
Electronics Forum | Thu May 13 01:41:31 EDT 2010 | nrw
Thank you everyone, I realise the problems now and the whole exercise might not be worth the money saved, versus just throwing out the leftover paste. I am based in Australia, so the number of players in this market is small and they know it. The pr
Electronics Forum | Mon May 17 12:46:43 EDT 2010 | flipit
Big problem. Certain LED from certain manufacturer sticks to the tape and reel cover tape. Peel back the cover tape and every LED lifts out of the embossed pocket and sticks to the cover tape. I believe this is from static and not any sort of adhe
Electronics Forum | Tue May 18 11:22:24 EDT 2010 | flipit
The ionizer was something we thought about right away. I need to investigate further. Somehow I need to get the ionizer mounted on the chipshooter. An oldschool chipshooter. A turret machine. My other concern is can I blow the ionizer at the par
Electronics Forum | Wed May 26 04:46:13 EDT 2010 | mmjm_1099
ALl - I need some feedback why a solenoid on station 3 is getting excessively hot. I have another line with the same setup but is not getting as hot. I have tested out voltage and see nothing that is triggering me there is an overvoltage. Any feedbac
Electronics Forum | Thu May 27 11:43:42 EDT 2010 | emrtech
you can use whatever you prefer, but they work just fine for us. have not had any problems with 0402 parts anymore, and get more use out of them than the stock jaws. we dont have to replace them as often, and seem to center just fine, and mager diffe
Electronics Forum | Tue Jun 01 03:51:05 EDT 2010 | aj
Hi, just enquiring about Vmanage offered by Mentor graphics as a factory management solution or any aletrnative. I have carried out some research on line but would like to hear from some users before I contact the supplier themselves. Any info grea
Electronics Forum | Tue Jun 08 19:13:03 EDT 2010 | vmorina
Hi Vee, I thank you very much for the reply,and yes everything is ROHS. I am reading over the manual and looking at the differences between them. I also have a questions for you regarding stencils for BGA and other types of packages. Do you know any
Electronics Forum | Wed Jun 09 14:41:12 EDT 2010 | ronchap200027
Has anyone had issues with Renco inductors failing. The component I'm having problems with is a 330uH shielded power inductor. Out of 36 board failures, I have 17 that failed because this inductor failed. Most often they end up reading -1.34 uH.