Electronics Forum | Fri May 13 22:16:16 EDT 2022 | alex22
Indeed, stickiness of LED dome varies from batch to batch. We didn't have much success with adjusting pick&mount settings. Also, usage of other nozzle (recommendation from SMT manufacturer) didn't help. Usually, we have a good experience with similar
Electronics Forum | Fri May 13 22:24:47 EDT 2022 | glasscake
Try adding blow after mount before head up if your machine lets you. Make sure your placing the part into the solder paste as that will add some holding force as well. If your tips are spring loaded you can do some 0.5mm additional mounting height.
Electronics Forum | Mon May 16 13:19:56 EDT 2022 | richardcargill
No idea if something like this is available commercially, but it would be easy enough to make one for a few dollars using an arduino to control it. If you have a local MakerSpace ( or similar ), contact them and ask if they could come up with a solu
Electronics Forum | Mon May 16 17:47:53 EDT 2022 | proceng1
Also, be sure that the board support is good. If you have any area of the board with less support, and it bounces a little when placing the LED, it may seem like it's randomly not placing correctly, and so any Z-depth or blow-off tweaking you do wil
Electronics Forum | Mon May 16 17:49:13 EDT 2022 | rdssmt
Hi. Please send me a copy of the manual of the Samsung CP20CV and I send the link to downloading the software. https://drive.google.com/file/d/1JlCcG_KkDmqzQe-1S7bmfV0EGSW2RvZn/view?usp=sharing Is a imagen of the software.
Electronics Forum | Mon May 16 20:01:38 EDT 2022 | ttheis
Still running our GSM's and some parts we see a high rate of "precise location" failures. We tried tweaking the component definition and feeder definition. We also tried copying to a custom feeder and doing a teach. Nothing seems to have ma
Electronics Forum | Mon May 23 12:39:43 EDT 2022 | FSTechnology1
What I do is Google SEO, which is to operate the company's website. I used to sell other products. Now the company asks me to do pcba. I don't know much about this industry. The content of the website does not know how to do it, and the keywords do n
Electronics Forum | Mon May 23 12:55:59 EDT 2022 | proceng1
Unfortunately I was not able to import the file. My software outputs 3 files, including .BRD, which I never use. I thought it might be able to import it, but it just says that it doesn't recognize the format. I tried Allegra and a few others, but
Electronics Forum | Wed May 25 12:09:52 EDT 2022 | stevemiles
Hi, I've had this problem with two DEK Horizon 03i printers. The first time it was the camera (firewire) causing the PC to freeze. The second time it was the firewire card in the PC that was the problem. Try moving the camera firewire cable to a d
Electronics Forum | Wed May 25 23:45:04 EDT 2022 | SMTA-64387687
1. The jetting head flies very low to the level of the board. So, performing AOI function will crash the head. 2. AOI is performed close to the end of the line, after P&P or reflow. Are you planning to run the boards back-and-forth, on the line? 3. L
