Electronics Forum | Fri Sep 27 13:34:34 EDT 2019 | tey422
We are to install a very small BGA socket, the datasheet noted to be torque the M1.6 size Phillips screw to the spec for installation. I couldn't find the correct size bit that would fit our torque screwdriver. Per the screw size, shouldn't it be PH0
Electronics Forum | Wed Oct 23 02:45:17 EDT 2019 | maxwilko
Hello there, My 'MyChronic MyData My500 Solder Jet printer' keeps having the same issue and I am unable to solve the issue. Suction flow too low: Check filter box and suction holes are clear. This problem would usually be solved by a new filter bo
Electronics Forum | Fri Nov 22 10:24:28 EST 2019 | rgduval
When you swapped the MOT card, did the proble move to another axis? I'm guessing no, but, wanted to clarify. If the problem did not move, you either have an x-motor problem, x-motor counter problem, or x-transducer problem as noted. Or, a cable pr
Electronics Forum | Mon Dec 30 12:55:37 EST 2019 | emeto
We saw your profile, which in my opinion looks alright based on the guideline from the vendor. Can you tell us more about the joints that you cleaned? Are they showing nice wetting and nice and shiny finish? How about your stencil thickness? From my
Electronics Forum | Thu Jan 09 20:52:02 EST 2020 | Mike Konrad
If the world was a perfect place, I would recommend preventing solder balls in the first place. While low amounts of solder balls are common, a high volume of solder balls are problematic to a cleaning machine (batch or inline). Solder balls may beco
Electronics Forum | Tue Jan 28 15:37:22 EST 2020 | stephendo
The best I have seen was two people set up and verify and then two other people not involved with that setup verify. It worked quite well but even then a wrong part was put on. Day shift set up and Afternoon shift thought that both verifications had
Electronics Forum | Fri Feb 07 13:17:32 EST 2020 | bk
I am assuming you are initializing each motor individually through the service program. The z motor theta is hard to see so I put a mark on it with a colored marker so you can watch if the midas tool nozzle is actually turning or not. You should be a
Electronics Forum | Wed Aug 11 12:41:05 EDT 2021 | jamesatqkits
Hi Bukas, Thanks for getting back to me. What is the IF board? Is that the Interface Boards in the cage? How do I know if I have a healthy hard drive? Is there anything in particular to look for? I will run chkdsk today and see if it reports any
Electronics Forum | Sun Mar 29 14:17:03 EDT 2020 | midast
Hi We have a MY 19 that just reboots the computer. It is like some just unplugged the power. We have nothing in the logs. All I see is when it starts up again. The problem can happen anytime. Today I found that it always happens when I try to auto
Electronics Forum | Fri Apr 03 10:29:29 EDT 2020 | stephendo
Time. The virus does not last a very long time on surfaces. Not sure how long but I read that it does not live long on copper but does last on stainless steel. As far as I know the virus lives as well on gloves as it does on hands. So you still have
