Electronics Forum | Fri Jul 21 12:05:41 EDT 2006 | Chunks
Do the math first. 10,000 boards a month means 440 boards a day (roughly, and not including weekends). Do you plan 2 shifts or only one? If one, you need to produce a board about every minute if you work an 8 hour shift. If all 110 parts are on on
Electronics Forum | Sat Aug 19 21:06:09 EDT 2006 | mika
Hi all, At our Fuji CP-6 machines we place a lot of 0402:s, 0603:s and 0805:s chip capacitors. Our problem is that the height of the components can sometime be very extreme from different vendors. I am sure you all have experience of this phenomenon
Electronics Forum | Tue Aug 22 13:05:32 EDT 2006 | Board House
Hi CP, From a PCB manufacturing side, all of our product is Lead free / RoHs compliant if it has a surface finish other than Hot Air. To be ROHS compliant and Able to with stand Lead Free Assembly, this is where the board house would need to switch
Electronics Forum | Sat Sep 16 12:49:36 EDT 2006 | magszoo
I'm hoping that someone may be able to shed some light on this error we've been getting on our DEK 265LT printer. Several months ago we began getting a "Rising table position error" after the operator would open the hood to load paste or after changi
Electronics Forum | Fri Dec 22 16:04:26 EST 2006 | mika
Hi, This Not so easy as one wuold think. Has the thermal pad of yours vias? How many? What's the via's dia? What is the pcb thickness? If the the pcb has a "ground layer" connected (vias) to the pcb thermal pad, it could sometimes be a little bit tri
Electronics Forum | Mon Jan 29 08:18:48 EST 2007 | mika
Hi Sami, A little more detailed information would be good,as it perhaps makes it easier for us to point you in the right direction of the root cause of your problem. And then you should fix that, rather than tweaking your programs around. 1. What typ
Electronics Forum | Fri Mar 16 16:26:34 EDT 2007 | James
This shows once again that this "what to buy?" and "What do you think about this machine..." crap really has no place in this Forum in my opinion. People have to get off their ass and do some investigating on their own. You have to be living under a
Electronics Forum | Thu Mar 29 20:15:41 EDT 2007 | darby
PCB > Origin > Origin 0 4 Teach the corner of the pcb at the mechanical stop. This data is from the machine origin. For a unit with a teach camera it will probably be around -25x, 95y. For a beam sensor around 70x, 28y. This is for a right to left
Electronics Forum | Sat Mar 31 11:03:21 EDT 2007 | jmelson
I have a left to right conveyor, so the X offset is larger, but that is not major. You say "Make sure you are teaching with the unit that the machine defaults to or asks for." This is the beam sensor, and I have found no way to change this, either
Electronics Forum | Mon Jun 11 16:40:17 EDT 2007 | mlb
Dear GR, I represent Kyzen Corporation and would like to address a couple points in your message. Both Kyzen and Zestron are global suppliers of engineered cleaning fluids for removing flux residues from electronic assemblies. Aqueous cleaning fl
