Electronics Forum | Mon May 16 15:33:52 EDT 2005 | jasont
Hi Fred, Will you consider used waver solders? I wills end you a list of pre-owned, good working waves that we have in stock. Regards, Jason
Electronics Forum | Mon May 16 17:05:17 EDT 2005 | pde
Also concider if you will be going lead free in the future as conversion can be a added expense. You may think about learning and going lead free from the begnining as the indestry is rapidly moving in this direction.
Electronics Forum | Wed May 18 19:12:26 EDT 2005 | HOSS
Hello, Assuming that your dwell and coverage at the wave are in order..... Have you checked the angle and pressure of your fluxer air knife? You can only count on capilary action to a point. The air knife, set correctly, will help get your flux t
Electronics Forum | Thu May 19 09:16:52 EDT 2005 | nelly
Check when you set up the board that it is positioned in the centre of the table. When the calibration is carried out the table drives away and then returns to capture the fiducial, if there is not enough travel left in the actuators then this is th
Electronics Forum | Mon May 23 10:16:58 EDT 2005 | rlackey
Hi Grant, You'll need to move the nozzle changer on your machine if you want to run very big boards, it comes out quite easily. (It's single track & not set up for RAM or PTIF, no shuttle & standard handling) Cheers, Rob.
Electronics Forum | Wed Jun 08 10:17:31 EDT 2005 | No B
Wow SB..thanks for the input and reply to this thread. Let us know what teritory you cover so we can assure you get part of the commission. Makes me want to purchase 3 units right away.
Electronics Forum | Thu Jun 16 08:41:45 EDT 2005 | ghenning
Hi Fred, Were you able to develop enough confidence with the AOI to eliminate manual visual inspections and save money/time? How did you manage this and still get good solder joint quality? Thanks, George
Electronics Forum | Tue May 24 21:35:26 EDT 2005 | steve
Great Thread, look if you really want to continue replacing 50lbs of bar a day. Could I offer my assistance in selling you your bar???? Just kidding!!
Electronics Forum | Mon May 23 08:17:34 EDT 2005 | mmjm_1099
In the northern hemisphere you count counter clockwise and southern hemisphere you would count clockwise. Now if your sitting on the equator than it can be either way.
Electronics Forum | Tue May 24 10:37:53 EDT 2005 | pr
Topline sells kits with the dummy components and the boards. They will also give you the CAD DATA for the placements on the board. You can also use these as "gold boards" to check placement accuracy and machine repeatability. http://www.topline.tv