Electronics Forum | Sat Sep 21 23:38:06 EDT 2002 | ivanchu
I got one problem from my production line recently. One 0.5mm pitch QFP IC have been used on my PCBA. Actually, the defect was happened in randomly. Sometime, we got the fillet completely but sometime is not. The solder joint look like is good, but t
Electronics Forum | Thu Mar 23 00:47:00 EST 2000 | Donnie DeYoung
Mark, If you find out anything please let me know. The only way we do it is by hand using a slotted spoon and dumping the lead and dross into a 3 gallon bucket and having it taken off site and recycled. It's a pain in the neck, and I don't like we
Electronics Forum | Tue Jul 18 16:14:45 EDT 2023 | daniel_stanphill
I remember having seen an ad on LinkedIn or somewhere that showed a handheld pen capable of manual deposits even on 0402 and 0.4mm fine pitch pads. I have been trying to search for it today and am seeing some comparable products but nothing that look
Electronics Forum | Tue Aug 31 08:10:38 EDT 1999 | Brian Conner
| I am building a board with T1/34 LED's in a 10X10 array there are 12 arrays in a panel. The LED's are body to body in the array, .1 spaced. The LEDS have been autoinserted on a Universal RAD III, so they are cut and clinched. The trouble I am havin
Electronics Forum | Fri Jul 26 05:14:38 EDT 2013 | anilw2006
We had a solder joint problem in gold plated PLCC68 ic. We do double sided reflow process with Cookson OL107F paste. First we do top with paste and second with glue process.The solder joint shape and wetting looked normal.In the process of testing
Electronics Forum | Tue Aug 08 21:00:24 EDT 2000 | Dave F
Shawn: You're correct most solder preform manufactures don't want to sell preforms without skinning you alive for tooling charges!!! Considering alternatives, can you print or dispense paste? It would be mucho cheaper. We've talked about using pa
Electronics Forum | Tue Jul 15 11:18:29 EDT 2003 | slthomas
It is an interesting situation....one that merits as much business philosophy analysis as technical analysis. I'll be getting my official 60 day notice today. Any criticism about our overseas suppliers (that were selected by sr. management w/o in
Electronics Forum | Mon Jun 12 06:45:10 EDT 2000 | kim ji tae
Hi! Thanks all who upgrade these pages. I have some questions. Is there any answer? I do double-sided reflow solderig, with 0.4% AG solder cream. with AU finished pcb. First I do reflow solder bottom side where 0.5pitch TQFP locates. Second I do re
Electronics Forum | Wed Aug 26 20:52:15 EDT 2020 | stephendo
One thing about liquid N2 is while it is safe, only let trained personnel near it. I believe if someone got their hand frozen on the side, it is not coming off until the dewer is completely empty and warmed up. And make sure management understands
Electronics Forum | Mon Aug 07 10:22:13 EDT 2000 | genglish
Ramon, I have had experience in the problems you are witnessing. The problem can relate to a number of factors. Obviously the printing process is the first place to start your investigations, try looking at the stencil apertures for bleed under the
