Electronics Forum | Mon Oct 24 13:17:18 EDT 2022 | micropak
I have successfully used "Offset" in pick position on a particular feeder/component on F3. My L/C is Linux 503.04 and SC software is probably 010 (RMOS). This 406, you are mentioning as Station software ? I believe you have to do it in feeder setup,
Electronics Forum | Mon Aug 14 12:06:18 EDT 2023 | calebcsmt
Please elaborate, as I have already tried to rule out printer setup. 0 contact of course, ive tried a multitude of pressures, separation speeds, cleaning frequency. Moreover, i use these settings for similar stencils and have absolutely no issue
Electronics Forum | Fri Feb 11 12:21:44 EST 2000 | Finepitch Services
Doug, What I've done in past was calling them as 1206T.5, 1206T1.0, SOIC16, RESNET16, SOIC16T5.0, ALCAP4, ALCAP5 etc. T means thickness but for the ALCAP case 4 means 4mm diameter. If you have the time and patience, having a board and attaching a s
Electronics Forum | Fri Jan 21 19:27:54 EST 2000 | Scott S. Snider
With the Siemens line computer it is possible to see what the maximum placements per hours should be for any given job/setup. After you optimize the job you should check that and see how you perform against that number. In many cases the placements
Electronics Forum | Thu Aug 12 22:31:10 EDT 1999 | Dave F
| Hello, | | Can any netters suggest what critical parameters should be considered & what are there assoicated impacts for a solder paste printing process ... | | B.Regards, | Felix | Felix: There are some 30 variables that affect SMT solder qua
Electronics Forum | Thu Apr 08 13:24:36 EDT 1999 | ADRIANO FERNANDES
| | I am getting ready to purchase a spray fluxing system for a no-clean process. I have narrowed it down to the Nordson or Dover system. Does anyone have any experience with either. If so can you relate with me. I am a little leary of the Nordso
Electronics Forum | Wed Aug 05 10:50:06 EDT 1998 | Jim Price
| Does anyone have an idea of what a good placement rate (pph) is for a low volume, high mix smt line? We do small lots (10-300pcs), with a feeder count that ranges from 28 to 130 per setup. We have low volume machines (an old (real old) Siemens HS-1
Electronics Forum | Wed Nov 27 09:51:08 EST 2002 | Claude_Couture
I have worked with 4c's for two years. The feeders are "tinker toys" with a mechanism that slips, so the pick-up has to be adjusted several times as the reel is used, especially with 13" reels. The worm gear was plastic on the steel shaft of the moto
Electronics Forum | Thu Mar 31 07:56:31 EST 2005 | cn
I agree with chuck, but would like to add. 2D is a great option and helps to keep your printing process in check, it will measure the x & y coverage on the pad. It will help you determin when your stencil aps become clogged or when the bottom of your
Electronics Forum | Tue Feb 01 13:35:32 EST 2011 | rgduval
We have recently taken to setting jobs up in BOM order. So, when the job is kitted (for turn-key jobs), or verified (for consigned jobs), the job is organized in either BOM order or in the order shown on the Components in Layout report printed from
