Electronics Forum | Fri Aug 06 10:06:34 EDT 1999 | Peter Brant
| | | I need to find quality benchtop develop, strip, & etch equipment. | | | Any ideas? | | try LPKF in Beaverton, Or. 503/634-0604 or the link below. I haven't used their eq so this is not an endorsement | | John Thorup | | let's try that link a
Electronics Forum | Wed Aug 04 08:08:10 EDT 1999 | Paul O.
| | We're getting field failures in a high impedance portion of the circuit. Think the unpopulated pc card has contaminates because we were able to grow dendrites by applying a 9 volt battery across the suspected pad, placed a drop of de-ionized wat
Electronics Forum | Mon Aug 02 18:46:33 EDT 1999 | Jim Blankenhorn
| | Has anyone done the research on BGA pad size? suppose I have a 0.030" diameter pad as recommended pad size from the spec, what will the minimum pad size allowed? We are laying out a high density board. | | If you know what component your'e going
Electronics Forum | Fri Jul 30 14:53:01 EDT 1999 | Tom B.
Hello Netters, I have a customer who wants us to aquaeos wash a PCB after all operations have been performed. The PWB is two layer FR4 with a Transformer, a Multichip Module with Conformal Coating, (6) 11" insulated wires that are tinned on exposed
Electronics Forum | Fri Jul 30 17:16:59 EDT 1999 | Dave F
| Hello Netters, | | I have a customer who wants us to aquaeos wash a PCB after all operations have been performed. The PWB is two layer FR4 with a Transformer, a Multichip Module with Conformal Coating, (6) 11" insulated wires that are tinned on e
Electronics Forum | Fri Jul 30 17:24:24 EDT 1999 | Dave F
| | Hello Netters, | | | | I have a customer who wants us to aquaeos wash a PCB after all operations have been performed. The PWB is two layer FR4 with a Transformer, a Multichip Module with Conformal Coating, (6) 11" insulated wires that are tinne
Electronics Forum | Fri Jul 30 19:19:21 EDT 1999 | M Cox
| So is anyone going to attend Nepcon Texas in Dallas, or is it a waste of time? | | So far I don't see some of the big players, and I would assume they would have their trade show dollars mapped way in advance. | | Being in San Antonio (should I
Electronics Forum | Fri Jul 30 17:32:15 EDT 1999 | Dave F
| Very shortly I will be evaluating OA flux and aqueous cleaning to replace our RMA and solvent cleaning process. I am primarily interested in batch aqueous cleaners for reasons of budget, floor space, etc. I am concerned about the ability of H2O t
Electronics Forum | Fri Jul 30 11:16:55 EDT 1999 | DLKearns
| I have been asked to supply a maximum shelf life for our assemblied PCB's. I realise this is dependent on so many factors- temperature, humidity, no of layers etc. But does anyone have a formulae for calculating shelf life, or does anyone know of a
Electronics Forum | Thu Jul 29 23:21:51 EDT 1999 | CH Lee
I received a request from customer to assemble ceramic substrate (alumina oxide)that printed with a low temperature Copper thick film conductor (the overglaze layer is polymer). The Copper pads are exposed without any coating. This ceramic substrate
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, USA
Phone: 18002796835