Electronics Forum | Tue May 18 22:12:52 EDT 2004 | Ken
I have considered using the same security methods employed at thousands of Gas stations across the USA. The bathroom key is attached to a large carburator, tire rim, or any 30 pound piece of towing chain! Seriously, I look at my processes and try a
Electronics Forum | Fri May 28 13:09:42 EDT 2004 | Glenn
Thanks for the advice regarding the ultrasonic spray fluxer ... we are currently using Delta Wave 6622c wave solder machine with dual spray heads (the ability to use two completely different kinds of flux chemistries). It's a great system that works
Electronics Forum | Fri May 21 20:38:40 EDT 2004 | Grant Petty
Hi, This would be a very exciting idea. Nitrogen is an inert gas, so this is why it's used, however Hydrogen mixed with oxygen in normal air is highly explosive, so it would be one of the worst gasses to use in a reflow oven I would think. Remember
Electronics Forum | Mon May 24 12:43:41 EDT 2004 | cyber_wolf
I have worked with Fuji turret machines for several years. I highly recommend them.They are mechanically superb. They very very rarely break. The only draw back from Fuji in my experience is the knowledge of the guys you get when you call the service
Electronics Forum | Mon May 24 19:58:41 EDT 2004 | Alan.
Hi Grant, change over and set up times for the CP's depend on a few things. For one, if you have enough feeders you can have the feeders reeled up ready to go on the machine. The change over will be very quick. If you are lucky enough to o
Electronics Forum | Wed May 26 00:41:31 EDT 2004 | fastek
I don't think you can go wrong with either choice. Couple of other things to consider: 1) Are both machines similar in price? 2) CP-6 feeders will work on a CP-7 although the larger pans need to be changed. Used CP-6 feeders go for about $175 on av
Electronics Forum | Sat May 29 15:58:37 EDT 2004 | Patrick Tarell ... Automation Engineering Jabil Circuit
Hello Alan! We have used both chipshooters, we also have a Mydata with the hydra head... We switched entirely from Fuji CP7 to the UIC HSP4796 and now HSP4797. The CP7 is a nice machine but we were very unhappy with the support structure within Fu
Electronics Forum | Tue Jun 01 10:51:28 EDT 2004 | Mike Albert
Guys I've been following your threads for a bit here. I have to say that the Universal machine is as robust and probably better than the Fuji. I too have been in this business for about 20 years and have had considerable experience on both. The pla
Electronics Forum | Fri Jul 02 17:15:52 EDT 2004 | Sam
You can't tell how a machine will perform on your particular board by looking at it place parts at a trade show. Usually they demo a best case scenario (parts in a simple grid pattern, few package types, etc.) You need to supply the board data for y
Electronics Forum | Sun Jul 04 12:26:47 EDT 2004 | fastek
Sam- It all depends on what and how many boards you're trying to build that will determine if gantry or turret is the way to go. I like gantry machines and have been impressed by their increased performances over the last few years but they still hav
.gif)
