Electronics Forum | Thu May 13 10:43:34 EDT 2004 | rob_thomas
hi, i have a question relating to fiducial, is > the fiducial normally comes with the pick and > place data from the custommer or we have to > define it by ourself? how to set its coordinate > so that the cp6 and ip3 (using Fujicam software) > w
Electronics Forum | Mon May 07 11:09:49 EDT 2007 | davef
4 Fluxer Operation 4.1 Set-Up and Check-Out the Fluxer 4.1.1 Spray Fluxer Set-Up and Check-Out 4.1.1.1 Pass a sample unsoldered board through the machine. 4.1.1.2 Remove the board just after passing through the fluxer and the air knife. 4.1.1.3
Electronics Forum | Sat Dec 28 06:58:33 EST 2019 | kylehunter
> yeah...I never had airflow volume problems with > Hellers. When I had to build the system I was > referring to, we had an old Speedline oven, and > the way it was configured if you didn't provide > enough airflow to the outer ca
Electronics Forum | Thu Nov 30 21:13:55 EST 2000 | Dave F
Can't find "WS601" on the Alpha site. What is that stuff? So, with nothing to go on, I'll just guess ... Yer probably cold welding the solder particles together. The nozzle size (inside diameter) determines the dot size. * With glue, small dot si
Electronics Forum | Tue Oct 31 03:50:20 EST 2000 | JohnW
Honda, Prnting Glueisn't as difficult as it sounds, as long as you have the right stuff and a good set up. It also depend's on what your going to be placing. If your just doing 0603, 0805 and 1208 than you really only need an 8 thou or 10 thou stenc
Electronics Forum | Wed Mar 07 20:43:55 EST 2001 | davef
Sure, the rolling action of the paste creates a weak magnetic field surrounding the paste. This is similar the field created by electric current flowing through a wire, as first described by James Maxwell. After creation of the magnetic flux, the m
Electronics Forum | Wed Apr 11 00:17:03 EDT 2001 | Dreamsniper
Hi, We got a 0.5mm pitch QFP144 from Altera with the below lead width specs. min. lead width = 0.17mm nominal = 0.22mm maximum = 0.27 What's the best pad or land width for the above? This is what our designer used. Land Width = Component Lead Wi
Electronics Forum | Tue May 29 12:35:36 EDT 2001 | genny
Dave, Sorry to drag this out some more. When I saw this thread I realized that we often get PWB's fabricated with a gold plated edge connector tab. However we have not ever given any specs to the fabricator regarding the gold plating - all we say i
Electronics Forum | Tue May 08 19:28:29 EDT 2001 | mparker
Received my copy of the standard about a month ago. Seems straightforward and gets away from the percentage nightmare. Mark Twain said it best with "There are 3 kinds of lies in this world - lies, damn lies and statistics!!" Now I have some nagging
Electronics Forum | Thu May 10 02:57:03 EDT 2001 | kjellman
Hi, Why not have a look at Philips/Assembl�on, their ACM machine is quite nice. It may also bring you down to Flip Chip, 0201 some through hole and odd form placement. Nice options like bulk feeding, coplanarity tests, fluxing for FC, prom feeders (