Electronics Forum | Mon Oct 13 08:43:56 EDT 2014 | rob
Hi Larry, Picture a old lady with a set of knitting needles with leads attached to them, pressing the needles into different points of the PCB (pads, test points or component leads) and measuring resistance, inductance, waveforms etc between these p
Electronics Forum | Mon Oct 13 15:33:36 EDT 2014 | rgduval
So...today, we were able to get rid of the z axis not mounted error. It looks like we did so by modifying the settings in axes location (matched them to the beam 1 settings). Now, when we try to lower the nozzles, we can hear a relay or switch clic
Electronics Forum | Mon Oct 13 16:32:55 EDT 2014 | tombstonesmt
Designator>Part Number>Alternate. 2D labels are placed on all slots of the machine, operator scans slot, scans reel with unique material ID. Green light if it's good, red light if it's bad. Our software cannot lock out a machine if there is an incorr
Electronics Forum | Wed Feb 18 13:32:58 EST 2015 | stevea
Hi Rob, Not sure if you made any decision on your SPI requirements. The recently established VisionMaster (Long history of previously shuttered business names) company sells products similar too, but not the same as the past "VisionMaster branded" p
Electronics Forum | Sun Oct 19 06:42:01 EDT 2014 | timbo292832
im designing a circuit that will require the use of a edge connector so it can connect to another circuit. i need to do this so i can get both micro controllers communicating i have done a bit of research and am thinking about using a pcb manufact
Electronics Forum | Mon Oct 20 18:53:39 EDT 2014 | warwolf
pci express x1? https://www.google.co.nz/search?q=pci+express&client=firefox-a&hs=ZJi&rls=org.mozilla:en-GB:official&channel=sb&source=lnms&tbm=isch&sa=X&ei=DZJFVKvRDaXemAXaxoCgDA&ved=0CAgQ_AUoAQ&biw=1173&bih=849#rls=org.mozilla:en-GB:official&chann
Electronics Forum | Thu Oct 23 09:45:05 EDT 2014 | rgduval
Generally, excess solder balls found randomly around the board/parts points to either a dirty stencil during printing, or a stencil/board that is shifting during printing (smearing the paste a little, and causing a dirty stencil. If the apertures ar
Electronics Forum | Wed Oct 29 13:00:27 EDT 2014 | Todd Grover
We have a Cencorp TR1000 Router that has been recently having problems. Frequently it will freeze up. This usually happens after running it for awhile. Sometimes the machine and computer both freeze up. When this occurs we have to completely shu
Electronics Forum | Mon Nov 10 09:11:51 EST 2014 | rgduval
The centering jaws are made out of copper, I believe...and conductive. I'd suggest that the conductivity of the copper makes it a fairly poor source of ESD damage in a component. I have observed physical damage to components from the centering jaws
Electronics Forum | Fri Nov 07 14:30:32 EST 2014 | klopi90
Hello! I am a lucky user of an ALD515 AOI, a cheap Chinese machine, and I would like to aks if anybody has any experience with it? My main problem is a lack of any manuals or tutorials for learning, what cause other difficulties. I have a one main