Electronics Forum | Thu Jan 09 15:40:58 EST 2014 | davef
Batch cleaner Aqueous Technologies, 9055 Rancho Park Ct, Rancho Cucamonga, CA 91730; 909-944-7771 F909-944-7775 aqueoustech.com Austin American Technology; 12201 Technology Blvd, Austin, TX 78727; 512-35-6400 F512-335-5753 aat-corp.com EMC Global Tec
Electronics Forum | Thu Jan 09 15:19:41 EST 2014 | davef
For a typical wear surface application [millions of wipes], I agree with hege. You need to be talking electrolytic gold, NOT immersion gold. IPC-2221 says something like ... For edge connectors and areas not to be soldered: * Nickel - 2.5um [~100uin]
Electronics Forum | Fri Jan 10 15:33:57 EST 2014 | hans88
Hello Rob, Thanks for your fast reply. I will check the parts you mentioned. You were right about the mot card we swaped it with a new one but that made no difference. Today we tried to find were the problem could be we: - removed the j1, j2 and
Electronics Forum | Mon Jan 20 11:11:24 EST 2014 | fnorradd
I have an Ersa Versaflow selective solder machine (single bath) which runs via a Profibus control system. I have checked all of the settings on the inverter, and all of the connections and outputs throughout the machine, but the machine returns a 68
Electronics Forum | Sun Feb 16 11:14:07 EST 2014 | unisoft
As mentioned the ProntoGERBER-CONNECTION software from Unisoft ( http://www.unisoft-cim.com/gerber_connection.htm) does the Gerber to intelligent shapes (ref des, x/y center, rotation, p/n, etc.) function for over 25 years. If you wish I'm availab
Electronics Forum | Mon Feb 24 12:41:18 EST 2014 | mi
Depending on what X-Y centroid / CAD data you need, there are different SW I've used to do the job. If you need PCB gerber "artwork" (rounds, rectangles, lines, squares,...geometric figures), you can use GraphicCode GC-Place & such - load the gerber
Electronics Forum | Tue Jan 21 13:40:00 EST 2014 | rgduval
If you're using the Kapton tape to protect the gold fingers from solder splatter, my first instinct is to say,yes, you do need it. I've had the pleasure of paying to have gold fingers reworked in the past. It is not in-expensive; certainly not equa
Electronics Forum | Thu Nov 20 06:09:00 EST 2014 | jlawson
Anyone have any idea how to use the HLC software > and in particular the Production Planning side > whereby you can cluster a number of sides or > Jobs? I want to fix side 1 of a program and > optimise side 2 around side 1 fixing common parts >
Electronics Forum | Fri Jan 31 09:38:58 EST 2014 | pavel_murtishev
Hello, I am trying to estimate hole filling after PiH process using phoenix x|aminer X-Ray Machine. The question is how to select correct inspection voltage? Inspecting at 60kV 40uA all PiH holes appear to be completely black, that means completely
Electronics Forum | Fri Jan 31 11:45:52 EST 2014 | emeto
Hi, to get better image you will probably need higher voltage(depending on how close you want to look). The closer you get the higher the voltage should be. Here are some tips for machine calibration: 1. Make sure your board is on focus. I don't kn
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, USA
Phone: 18002796835