Electronics Forum | Wed Jan 26 06:40:17 EST 2005 | mattkehoe
You can place them by hand and reflow them using a toaster oven if you use SIPAD ssd with adhesive flux. Yes, I said a toaster oven. It is being done!! Convection ovens work best. Give me a call and I will send you some sample boards to try it out
Electronics Forum | Thu Oct 22 21:52:40 EDT 2009 | ericg2000
I recently started a company that uses BTU Pryamax reflow oven (7 heat zones, 2 cooldown). Any advice on creating profiles for both leaded and lead free products? also what can you tell me about oven profiling with this model? i'm told it has buil
Electronics Forum | Thu Jan 07 10:19:43 EST 2016 | dyoungquist
In 2014 we paid about $40K USD for a new Heller 1707 MKIII (no nitrogen) which is a 7 zone oven. One does not need a 8-10 zone oven unless you are doing high volume. We use the 1707 for everything including lead or lead-free solder, 0.031" to 0.093
Electronics Forum | Mon Jan 09 11:34:40 EST 2023 | tommy_magyar
How big is the board? What is the thickness? How populated is it? Is it warping in the reflow oven? If yes, does the oven have any support? How big is the pad compared to the component footprint? How thick is the stencil? Are the components checked b
Electronics Forum | Wed Sep 08 13:09:40 EDT 1999 | Joe Wayt
Hello: We are using a Heller 1500S reflow oven to solder surface mount parts. Just within the last two weeks, the larger I.C.'s are moving while going through the oven. The parts are checked for placement before putting into the oven. When the
Electronics Forum | Fri May 18 14:40:16 EDT 2018 | raylawre
Currently doing weekly to get a good baseline. Once its satisfied that the oven is stable/repeatable, then it will probably go with a monthly PM. We had an OvenRider in house, so no need to reinvent the wheel and make another vehicle. Keeping it in g
Electronics Forum | Mon May 24 10:45:04 EDT 1999 | John Thorup
| Can anyone help me with the correct baking cycle for removing moisture for PWB's. These are 10 layer double sided SMT. | | Thank You R. J. Klein Wassink in Soldering in Electronics states - 16 hours @ 105C or 40 hours @ 80C in a ventilated oven
Electronics Forum | Tue Feb 02 13:55:52 EST 1999 | Brian Stumm
| Hi everybody. | Somebody know any consideration or special care to make a profile for BGA's. | | any advice is aprecied. | | thanks | Al Carrillo | | | Al, From my experience BGA's are no more difficult to profile than any other component.
Electronics Forum | Tue Jun 20 08:40:40 EDT 2006 | dallen
This is a long shot, but can anybody advise on the supplies for a BTU oven. It is currently in the UK and is supplied by a 415V 4 wire. That is 3 phases and a neutral. We need to ship it to our plant in Mexico where they have a 480V 3 wire supply.
Electronics Forum | Thu Sep 13 15:09:07 EDT 2018 | reckless
So it took me a few months to figure out the compact reflow oven market. I bought the following ovens: Heller 1500EXL Essemtec RO300FC-C - QTY 2 DDM Novastar Gold Flow - Desktop DDM Novastar 1800HT - Conveyor Zevatech 5 zone oven T962C benchtop ove
