Electronics Forum | Thu Sep 12 15:23:06 EDT 2002 | soupatech
I amusing a Fuji CP3. The part data seems to be the easiest part for me, 3x3 square. I went with the 2mm and had LOTS of dropped parts. A 1.3mm worked MUCH better, between 1 and 2% loss. My only problem now seems to be profiling the oven. The specs o
Electronics Forum | Thu May 26 18:55:15 EDT 2005 | bakersm
I have been comparing Mirtec to Yestech on a regular basis. As a AOI trainer and installer, I have seen significant difference between the machines. 1. In a side by side comparison just today, using the same board, I found the following: a. Insp
Electronics Forum | Thu Oct 05 23:44:55 EDT 2006 | zoltans
Hi, Has anyone got first hand experience with the JT wave soldering machines, WS series? I use a low solid VOC free flux and it seems I have problems atomizing the flux properly and this generates soldering defects, leaving lumps and big solder bal
Electronics Forum | Sun Oct 08 23:37:37 EDT 2006 | zoltans
Hi, Has anyone got first hand experience with the JT wave soldering machines, WS series? I use a low solid VOC free flux and it seems I have problems atomizing the flux properly and this generates soldering defects, leaving lumps and big solder bal
Electronics Forum | Wed Dec 20 12:46:56 EST 2006 | rmitchell
O.K. The noise is happening 1-3 times per day and I have yet to be there as it happens. I will probably order the new Ball Screw for $3,000.00 There goes our Holiday turkeys! Are they any other parts that should be replaced along with it? How diff
Electronics Forum | Mon Jan 29 15:49:08 EST 2007 | rmitchell
Hi, Our Fuji CP65 nozzles are jamming in the up position. Mostly on caps and resistors, the .7mm (0402) and 1.0mm (0805) and 1.3mm (1206) sizes. They seem to be catching internally where the little peg slides down the slot. If you twist them they
Electronics Forum | Mon Dec 17 19:11:21 EST 2007 | bbarton
Have to agree with Steve. PROFILE PROFILE PROFILE It's the ONLY way with lead free. Think about it for a second...a process window about 1/3 the range of SnPb (assuming a 250 degree C max component temp) and you wind up with a fairly small target to
Electronics Forum | Sat Jan 26 00:39:21 EST 2008 | fastek
When I left the industry about 15 years ago in the Bay Area, good SMT technicians were making $85K per year at OEM's. The process and manufacturing engineers where I worked were all making $125K and more. Real estate was 1/3 the cost it is today. Gla
Electronics Forum | Mon Jan 21 06:04:12 EST 2013 | bobpan
Some things to try.....keep in mind it has been over 10 years since i programmed one of those machines. 1. Tep Vision is what you should be using. I think it was called tep vpass in older software. 2. Maybe try goto 0 instead of goto 1. 3. Make sure
Electronics Forum | Mon Mar 19 08:11:51 EDT 2012 | abielectronicsltd
Hello. Could anyone tell me what kind of connectors these are on these cables & where to get them from? They are for ribbon cables to mount 3M DIL test clips to ribbon. I have tried contacting 3M but they don't seem to want to respond. These connecto
winsouce.jpg)
.gif)
