Electronics Forum | Mon Aug 27 18:16:32 EDT 2012 | bandjwet
Some time ago I ran into 2 companies in the US providing screen printing of PCBs where traces and pads and jumpers could be added to existing high volume unpopulated assemblies. Does anyone know of such suppliers in the US (one of our customers wan
Electronics Forum | Mon Mar 05 17:54:07 EST 2012 | swag
Three ideas for you: 1) Make sure nozzle tips are clean. 2) Check coplanarity of leads to bottom of body. If leads are above body, it could be the are not contacting paste well. 3) Investigate static charge in the parts caused by the feeder or
Electronics Forum | Fri Mar 09 05:06:09 EST 2012 | grahamcooper22
Is your solder paste deposit drying out? Or if the paste deposit is small or there is insufficient paste then the tack between the device and paste will be poor so it can easily come out of the paste during its placement or placement of other parts.
Electronics Forum | Thu Apr 12 17:49:35 EDT 2012 | rodrigo
I've done the Fuji flush. It does the same thing. We can not load proper again because it does not communicate with either the F4G or MCS/30. I was able to boot into mechanical mode at one point but now I can not do that either. This thing is drivi
Electronics Forum | Wed Apr 25 14:41:13 EDT 2012 | davef
Try: Equipment, Sldr pallet hdware clips * Summit Precision 5825 S 25th St, Phoenix AZ 85040 Dennis Miller 602-268-3550 summitprecision.com sales@summitprecision.com * Southco 210 N. Brinton Lake Rd, Concordville, PA 19331-0116; 610-459-4000 southco
Electronics Forum | Fri May 04 16:22:21 EDT 2012 | wesm91229
Hi Tristian, I work at the 1st company listed- the link you posted is our website. We have updated our clamps for those type of SMT process carriers. Feel free to email me @ wmartin@gscusa.net or call 972-494-1911 and I can help you out. Sorry for
Electronics Forum | Thu May 03 15:07:59 EDT 2012 | rodrigo
Hi all, What the largest part I can place with these machines? I'm going to try to install a PLCC68 using the front light because the part is bigger than the backdisk and I want to make sure it can handle it. The part is about 30mmx30mm. Thanks
Electronics Forum | Wed Aug 29 08:59:41 EDT 2012 | davef
Hi Bob Two companies that provide this type of service. * Additive Services Inc. Hudson, NH * Conductive Circuits Inc. Garner, IA I know there was a third company mentioned in a thread on SMTnet, but I can't find it, my notes are blanked, and wan
Electronics Forum | Wed Aug 29 09:50:41 EDT 2012 | bandjwet
Hi Bob > > Two companies that provide this type of > service. * Additive Services Inc. Hudson, NH > * Conductive Circuits Inc. Garner, IA > > I know > there was a third company mentioned in a thread > on SMTnet, but I can't find it, my notes a
Electronics Forum | Mon Apr 16 13:31:36 EDT 2012 | jdengler
Have you tried to restart F4G and/or MCS/30 after flushing the CP4 memory? I have occasionally ran into the comm error after a reset start. Leave the machine on and restart F4G or the MCS/30 whichever normally is hooked up. If it still won't commu