Electronics Forum | Mon Oct 21 22:15:36 EDT 2002 | davef
First, SIR data is heavily dependant on the test pattern selected. Be very careful when comparing the results of resistance readings taken from different geometric patterns. Second, if yer talkin': * Bare boards, yupper. * Finished assemblies impor
Electronics Forum | Sun May 09 16:25:00 EDT 2004 | gabriele
Military and most commercial standards requires > post-soldered boards to measure less than 10 > �g/in of NaCl (14 when using an Omegameter, 20 > on a Ionagraph, and 37 on a Zero-Ion). > > As Dave > stated, 6.5 �g/in of NaCl is called out in >
Electronics Forum | Thu Dec 31 01:09:18 EST 1998 | Kelvin Chow
Dear Micheal, SIR test is used to characterize fluxes by determining the degration of electrical insulation resistance of rigid printed wiring board specimens after exposure to the specified flux. (IPC TM-650 #2.6.3.3 http://www.ipc.org/html/tm2.6.h
Electronics Forum | Thu Dec 31 14:20:35 EST 1998 | Michael Allen
Kelvin, Yes, we're referencing the same spec. I performed the test under the Class 2 conditions (except that I used a 100V bias rather than 50V...but my water-washed microBGAs still passed). Regarding the omegameter test: we have this instrument,
