Electronics Forum | Thu May 04 15:32:21 EDT 2017 | dilogic
On the HP Servo panel there are LED's that indicate state of limit switches - so you can see if the problem is in the switch or somewhere else. Did you check it?
Electronics Forum | Thu Dec 18 17:10:01 EST 1997 | Tom Volker
I am designing an SMT pad for a ss metal switch. Finished copper thickness is .0014 and nickle-plating originally is 150 millionths. Initial testing yields 100,000 to 150,000 switches before intermitent failures (copper is reached.) I want 500,000
Electronics Forum | Fri Apr 28 16:03:31 EDT 2017 | ilavu
I have GSM1 (OS/2) machine and it does not zero. The Y axis comes to all the way front to hard stop. I replaced the limit switch before the hard stop and can not find any way to test the signal from limit switch in diagnostic. I like to replace the c
Electronics Forum | Fri Jul 11 00:31:31 EDT 2003 | swuicsup
Marcel, Reconfiguring your machine from 80 to 20 stations is quite easy. In the sequencer portion of your machine, it has it's own I/O box. in it, there's the MIT card, location (1). The bit switches are there to inform the controller in the in
Electronics Forum | Thu Feb 05 02:30:00 EST 2015 | sarason
We were using TL1240Y Tack switches for 2 layered > PCB and posted those switches by hand. Now > planning to re-spin PCA where we recommend that > part to be added on SMT process. So looking for a > better and opt switch with same specs. Please
Electronics Forum | Mon Dec 22 16:09:02 EST 1997 | Justin Medernach
| I am designing an SMT pad for a ss metal switch. | Finished copper thickness is .0014 and nickle-plating | originally is 150 millionths. Initial testing yields 100,000 to 150,000 switches before intermitent failures (copper is reached.) I want 50
Electronics Forum | Tue Mar 31 15:14:53 EDT 2009 | kpm135
Is your machine an inline system with the conveyors along the back? If so I have run into this problem before with the sensors on the covers for the conveyors. They are 'magnetic' safety switches that can appear to be closed but don't actually switch
Electronics Forum | Wed Jul 09 05:06:52 EDT 2014 | bobpan
Are you sure you don't have a door interlock problem? Some of the covers of mirae machines have a physical switch and a magnetic switch that both have to be made for the interlock to be closed. It could be if you have a magnetic switch that the magne
Electronics Forum | Tue Feb 03 19:08:22 EST 2015 | vb7007
We were using TL1240Y Tack switches for 2 layered PCB and posted those switches by hand. Now planning to re-spin PCA where we recommend that part to be added on SMT process. So looking for a better and opt switch with same specs. Please suggest me an
Electronics Forum | Mon Apr 14 17:38:18 EDT 2014 | bradlevy
I've got a small smt board I've already got working prototypes of, which uses a tactile switch. I've got another much less expensive tact switch of similar size that I had avoided due to a difference in actuators I originally had no way around. Now I