Electronics Forum | Thu Jun 01 07:40:23 EDT 2006 | netellink
I have a Suzuki vision machine with 4 heads (SMT-1000VL). This machine is using the camera to inspect the nozzels (4 sets) in the nozzel tray changer every time it is going to change the nozzel(s) in the 4 heads. The problem I have is now the machine
Electronics Forum | Mon Jun 05 11:51:40 EDT 2006 | jdumont
I was wondering if anyone could help point me in the right direction on this one. This morning I discovered that our hand solder operators have been using the liquid wave solder flux for some hand soldering operations. We are using Kester 245 63/37 n
Electronics Forum | Thu Jun 08 19:51:22 EDT 2006 | grantp
Hi, That's good news, and we did outs with SN100C as well on Wed, however we are still working hard on getting a good profile. We have some large BNC connectors, and they are hard to profile. We also have wave palettes, and these might be too thick
Electronics Forum | Tue Jun 27 14:40:41 EDT 2006 | pms
SrTech, Thanks for popping in. Your MyData advice has always been good. Anyway, all of our TM8FC's do have the correct seperators. So nix that. I thought the timing only had to do with advancing and stopping the component into the pick line correctl
Electronics Forum | Fri Jun 16 15:50:08 EDT 2006 | Bert van den Berg
PSA - Pressure Sensitive Adhesive? I don't know which type of tape the affected reels of parts use but it is not sticky. Thanks everyone for the comments and suggestions. There were no missing teeth on the plastic take-up reels. I have cleaned an
Electronics Forum | Thu Jun 15 05:48:20 EDT 2006 | greg_diaz
Your concern should be do you have a glue process that can keep up with the FCP6. We ran a GL541 in line with a CP643 which the glue machine was actually a bottle neck because if you run SOIC's which require more glue dots then it will slowdown the
Electronics Forum | Tue Jun 20 22:52:10 EDT 2006 | davef
We all know those academic 'reliability studies' are very focused and only give a snapshot of real life. The real reliability studies of leadfree are starting as we scramble to meet our numbers. We have no idea about your customers' expectations ab
Electronics Forum | Thu Jun 22 03:27:08 EDT 2006 | dman97
Hi everyone, I was wondering if anyone knew of a backdoor setting in these machines that will allow you to change the machine configuration. At my company, we have one operator who decided it would be nice to lock everyone out of the user menus. He
Electronics Forum | Fri Jun 23 00:13:56 EDT 2006 | Ola
Mr. Evtimov, Keep in mind, that most of us do this in our spare time. I can't really understand why You yell at us, since most of us try to exchange information? Yes there are sometimes crazy answers and sometimes even more crazy questions, but You h
Electronics Forum | Thu Jun 22 18:43:08 EDT 2006 | Bolos
guys, anyone who can comment on this..we have a new project to design ..either to choose BGA vs. QFP and since we all know that BGA is preferable. I preferred as well BGA but my expert designer need extra 3 dollars on the board ?/ HOW TO WIN??? I h