Electronics Forum | Fri Jan 22 11:24:10 EST 2010 | thanh
HAVING A PROBLEM WITH DEK-248 REAR SQUEEGEES AFTER PRINT NOT COMING BACK UP. AFTER SHUT DOWN TO REBOOT, BOTH DROP DOWN,INITIALIZE MACHINE THE FRONT WORK NORMAL, THE REAR SLOWLY MOVING BACK UP, ANY ADVISE. THANKS
Electronics Forum | Tue Mar 30 06:27:22 EDT 2010 | ristikas
It happens on the middle of the stecil cleaning. The camera and the cleaner will stay under stencil in half way back. Then machine asking the initate the motors. If to press initate then the pcb stopper will hit the rails. Usually we move camera and
Electronics Forum | Tue Jun 01 15:06:40 EDT 2010 | thanh
I did. Nothing change. I can go in mount feed back and increase .5mm for all rotations(Lazer mount feed back), then it work. But all my parts go to camera will be off the oposite way.
Electronics Forum | Mon Sep 20 13:55:37 EDT 2010 | jamyboy
Check to make sure that the front and back of the DEK265GSX covers are closed. I have seen issues where the back cover trips its interlock and people go other places to look for the problem.....hope this helps
Electronics Forum | Mon Jan 03 14:38:42 EST 2011 | leemeyer
I had this problem awhile back and it turned out to be a problem with the computer Bios settings. The battery had gone dead and the settings were set back to the default state. Luckily I have 2 of these machines and was able to reset the Bios configu
Electronics Forum | Thu Jul 07 08:39:39 EDT 2011 | ianjames
How to compensate the back pressure effect that affect the wire of SMT molded package? The wire looks like snake and we call-it snake wire. It only happen near the stitch.
Electronics Forum | Wed May 16 13:38:02 EDT 2012 | wavemasterlarry
Listen, I remeber a thread hear where a potato was used to some how help eliminate dross or help with the ROhS. Its been a while since they had me back on wave, but I am back now.
Electronics Forum | Sat Jul 13 17:38:20 EDT 2013 | ericrr
um thanks I have just got back into the settings and switched back on, for most of the time I have it switched on but now and again switch it off, just because "what is the difference?" at this stage I will never know.
Electronics Forum | Wed Nov 06 15:01:37 EST 2013 | leemeyer
Thanks Bob, Any idea on how to switch between the front & back monitor/keyboard. This machine doesn't have a front/back switch like my other one. i am guessing that there is a keyboard sequence that i need to hit.
Electronics Forum | Wed Mar 21 17:45:48 EDT 2018 | stephenj37824
We heard back from Ipulse/Yamaha today. I'll have the quote back on the Ipulse M20 tomorrow. I'll keep you posted but the Ipulse seems to be much more cost effective. We are looking at the 12 head version. You guys are great.... Thanks so much!