Electronics Forum | Mon Aug 25 00:31:53 EDT 2003 | Dennis O'Donnelll
It could be moisture in the BGA. You should always bake the BGA before installation of course. But most likely you are usingf too much heat or too fast of a ramp speed. Make sure your top heater temp is below 230C. Set top heater to 220C, then adj
Electronics Forum | Fri Feb 01 16:11:08 EST 2008 | operator
They have been having a lot of fallout and they believe it is one of the BGAs that is causing it. I tell all my customers that it is better to stay away from baking if possible and to practice proper storage techniques. But the thing is they insist o
Electronics Forum | Tue Jun 13 23:08:32 EDT 2006 | mrduckmann2000
WINSLOW IS NOT THE BEST CHOICE, WE HAVE TRIED SEVERAL DIFFERNET STYLES OF BGA'S WITH NO LUCK. WINSLOW HAS EVEN HAD TROUBLE RE-BALLING OUR BGA'S. THEY SUGGEST LONG BAKE TIMES, DIFFERENT FLUXES...ETC NOTHING HAS WORKED PERFECTLY. THE PREFORMS ARE B
Electronics Forum | Tue Sep 09 16:00:07 EDT 2008 | ppcbs
We always bake our loaded boards before any BGA rework is done. 12 to 16 hours at 100 c. We have had incidents in the past on loaded boards where 125 c has melted parts and the occasional low temp BGA trays. 100 c has proven safe for the past 10 y
Electronics Forum | Thu Apr 09 07:37:18 EDT 2009 | fowlerchang
Another suggestion for it. Baking the whole boards before rework the BGA. It is not only benifit to the BGA but also to the pad.
Electronics Forum | Thu Jul 31 21:21:54 EDT 2003 | praveen
Yes we are baking the boards and the BGA. Using a CDM material pallet to hold the PCB as clamping is a problem without that.
Electronics Forum | Thu Jan 03 02:35:18 EST 2002 | ianccy
Hi, I am trying to write SOP about the baking requirement of some CSP and uBGA components, the label on the packing said its usable within 72 hours and follow the MSL 4 condition, what does the MSL means? is it Material Safety Level? Has anything to
Electronics Forum | Thu Jan 03 02:36:04 EST 2002 | ianccy
Hi, I am trying to write SOP about the baking requirement of some CSP and uBGA components, the label on the packing said its usable within 72 hours and follow the MSL 4 condition, what does the MSL means? is it Material Safety Level? Has anything to
Electronics Forum | Wed Jan 17 07:55:11 EST 2007 | pavel_murtishev
Vladimir, Phil J is right. Tantalum�s moisture vapor outgassing is the root of the problem you are searching for. Internal pressure of entrapped moisture becomes very high in reflow zone. Vapor jet shifts your components and affects BGA�s bumps. Bak
Electronics Forum | Mon Nov 20 04:04:42 EST 2000 | Gyver
Sirs, Please do me a favor to answer the following questions, thanks a million! 1. Will the baking of BGA or PCB cause more oxidation before the SMT process? 2. What is the acceptable Life Time of solderability at customer site? The time that the sol