Electronics Forum | Fri May 13 19:33:37 EDT 2022 | alex22
Hi Chris. Thanks for sharing these details. We are working with Cree XP-G3 LED (3535). We bought urethane nozzle from CoT (recommendation from Cree), but it didn't solve problem of LED sticking to nozzle. Cleaning nozzle with isopropanol (other recom
Electronics Forum | Sat May 14 00:10:30 EDT 2022 | cbeneat
Alex, I can tell you from experience it took a great deal of experimenting with settings when we first started running these. Our best course of action if the settings aren't making a difference, is the blow off. I've had it, let's say pretty high as
Electronics Forum | Thu Sep 08 18:10:09 EDT 2022 | mt396596
We just went through a similar issue with our MY12E. Make sure your Midas vacuum system is working, check your Midas Z friction. Also verify the Centering unit centering band. You can swap your MOTZ and MOTC to rule out the card. The tool install t
Electronics Forum | Sun May 07 14:59:39 EDT 2023 | smtusa
Has anyone tried this on a my9/12/15/19? I have a 21.4mm tall component. Any drawbacks about doing this permanently? Max component height is 15 mm as standard but 22 mm with a few modifications. Board edge clearance is 3.2 mm. The top board edge
Electronics Forum | Sat Jul 08 02:10:31 EDT 2023 | unsung
Wipe down and clean the 2 Gold strips on Y Axis and the encoder ( located on both sides of the machines covers must be removed ) Probably has dirt happen to someone who had an old universal 2007 that was sitting outside in the open air for a few day
Electronics Forum | Mon Jul 10 13:08:21 EDT 2023 | ttheis
Thanks, I do recall reading about loading firmware onto some of the VME cards (VRM axis controllers I believe.) I will review this again. I agree that it seems to be some issue with reading axis position after hitting the home switch. The first thin
Electronics Forum | Tue Dec 19 11:40:47 EST 2023 | jeana
Hello everyone, We recently got a Quad IVc machine with PPM software on it. We are struggling with 0402, as we get plenty QuadAlign failures. We ticked Vision on failure, so that we limit the amount of rejected parts, but on 0402 Vision system gi
Electronics Forum | Wed Feb 14 11:50:22 EST 2024 | erikfriesen
I'm trying to understand what it takes for the optimizer to do simultaneous pickups, it seems it's just jumping all over. Does every feeder have to be the default position? Or does every one have to have the same offsets? Or does the head offset cali
Electronics Forum | Wed Mar 13 13:08:31 EDT 2024 | lambert
Section 8 in the J-STD-001 was the initial place to start with cleaning and the requirements, however with all the changes going on within the industry with increase product densities and such, a revision is being created to help understand the need
Electronics Forum | Mon Apr 08 14:07:25 EDT 2024 | kingkelvin
Hello all - so I got in the calibrate plate for hydra tool offsets - it completed the calibration - I then installed the first row of white tips with the menu - and the machine still does same thing it puts the tips away but makes a hitting type nois
