Electronics Forum | Tue Jun 13 09:40:36 EDT 2006 | grantp
Hi, Your right guys, and we turned off the chip wave, and most of the problem went away. It looks much better, and we are getting a slight bridging on a USB connector at the front edge of the PCB and a little adhesion, but not any where as much as w
Electronics Forum | Thu Jun 29 08:31:03 EDT 2006 | MarkM.
Hello all, I have a dilemma at the moment with my CP4 pick and place positions. I get alot of parts in the rear of the machine and inside. I also as of late starting to get parts flying around on the boards once in awhile. I have checked pick positi
Electronics Forum | Thu Jul 20 19:51:40 EDT 2006 | darby
Are you trying to tie someone to an agreed wastage level or are you being tied? What machines are you talking about? What components are you talking about? The only acceptable wastage level is zero: but you can't get to zero until you've had some was
Electronics Forum | Tue Aug 22 15:57:17 EDT 2006 | slthomas
As far as room goes, I have to talk my boss into getting rid of some other crap around here before looking at the Mydata. The room is there, it's just occupied by stuff we NEVER use. My understanding of the TP-9 is that it's considered flexible but
Electronics Forum | Thu Sep 14 10:40:10 EDT 2006 | realchunks
Steve is right, why risk cross contamination and suffer real legal battles from your RoHS customers you guarantee lead free to. Al is also right. If your customer knows they are pulling the wool over the RoHS watchful eyes, why would you want to
Electronics Forum | Sat Oct 28 10:40:54 EDT 2006 | grantp
Hi, I totally agree. If I purchased a machine, and a company wanted me to pay some kind of fee just to be able to purchase parts, I would go nuts. What a terrible policy. I think, and this is becoming more common, that companies are becoming so sel
Electronics Forum | Sat Oct 28 02:25:19 EDT 2006 | mika
Agree!! Where is Your thermocouple-probes attacded and can we get the info from this? Delta-T of the comp. is very, very important! The single most important smt-process step is the profiling/recipy and as a result of this, this poor package will cor
Electronics Forum | Thu Dec 21 02:27:57 EST 2006 | pavel_murtishev
Good morning, (1) This depends on component type. In general it would be better to have fully populated board. Or at least you should mount components with different thermal mass. You should place TC�s at three points at least: component with high t
Electronics Forum | Thu Dec 21 13:11:25 EST 2006 | SWAG
We have fought with cut-tape way too much. It's always a bad idea. We've tried a couple methods/devices for manual splice with limited success. Before you look into this I would ask them if they could supply you cut tape qty's inslusive of fairly
Electronics Forum | Fri Jan 19 04:12:37 EST 2007 | AR
Hi I know that pump stencil technology can be used to print adhesive on boards with TH components already placed and clinched, but what about solder paste? The production sequence goes like this: First the jumper wires are placed and clinched with