MyData 12 errorF-TLMN-18

Subscribe to Thread

When I try to install any tool on my MyData12 I get the foll... - Jan 02, 2024 by tomdegas

Based on the my15 we used to have and our current My100's I'... - Jan 05, 2024 by MistrThou

The issue is with the Midas head. It gives me the same erro... - Jan 05, 2024 by tomdegas

Please clean the HEAD in BIRAL and put the NYK-2 Greese Solv... - Jan 05, 2024 by RMRSHIELD

HELP. I DO NOT KNOW WHAT BIRIL IS. WHERE IS IT LOCATES ... - Jan 17, 2024 by tomdegas

BIRAL is a HEAD cleaning oil it's not a overall HEAD clean t... - Jan 17, 2024 by RMRSHIELD

You may have to clean the inside of the midas head with a sm... - Jan 17, 2024 by MistrThou

tomdegas

#90415

MyData 12 errorF-TLMN-18 | 2 January, 2024

When I try to install any tool on my MyData12 I get the following error message:

F-TLMN-18 Failed to reach tool bank level

How do I fix this error? It passes the Hardware Initialization test.

reply »

MistrThou

#90426

MyData 12 errorF-TLMN-18 | 5 January, 2024

Based on the my15 we used to have and our current My100's I'd say it lost the position of the tool bank. Is it Hydra or Midas tooling? Uninstalling and reinstalling the hydra tool bank is fairly easy.

If it's Midas tools, does it fetch other tools ok? Could be an overall tool length program issue.

reply »

tomdegas

#90428

MyData 12 errorF-TLMN-18 | 5 January, 2024

The issue is with the Midas head. It gives me the same error with any tool I try to install.

reply »

RMRSHIELD

#90430

MyData 12 errorF-TLMN-18 | 5 January, 2024

Please clean the HEAD in BIRAL and put the NYK-2 Greese Solved thit issue

reply »

tomdegas

#90468

MyData 12 errorF-TLMN-18 | 17 January, 2024

HELP. I DO NOT KNOW WHAT BIRIL IS. WHERE IS IT LOCATES

reply »

RMRSHIELD

#90469

MyData 12 errorF-TLMN-18 | 17 January, 2024

BIRAL is a HEAD cleaning oil it's not a overall HEAD clean the inside of nozele picker only

reply »

MistrThou

#90470

MyData 12 errorF-TLMN-18 | 17 January, 2024

You may have to clean the inside of the midas head with a small cotton swab, thats usually for the spring tools line. The midas travels up and down on rails, and those and the rack/pinion gear that drive it need clean grease.

It may be that the machine lost its known position of the midas tool bank. You could uninstall and reinstall the tool bank and then reinstall the tools on the tool bank. Thats all through the utility menu > tool installation >

reply »