Printed Circuit Board Assembly & PCB Design Forum
SMT electronics assembly manufacturing forum.
We bought a used MPM up3020 screen printer as is. As I power...
- Apr 27, 2004
by
Kuru
Does it need shop air?
Are there any moving axes that are a...
- Apr 27, 2004
by
CC to myself
I have air, It start up and "About to Reset/press next to co...
- Apr 27, 2004
by
Kuru
You can call us, we will give you some tech support free. I...
- Apr 27, 2004
by
Value Machine Sales
With the machine off, try to move all axes manually away fro...
- Apr 29, 2004
by
CC to myself
You may also have a faulty sensor. We have a MPM that had a...
- Apr 29, 2004
by
Try to check axis drivers - at the begining should be tactil...
- May 03, 2004
by
We have had the same problem with an AP27.
The cause then w...
- May 04, 2004
by
You can call MPM technical support at 800-737-8110. They sh...
- May 04, 2004
by
Your are right my trackball was the problem, Now it resets a...
- May 04, 2004
by
Kuru-
If you have a bad tactile sensor....find out what t...
- May 05, 2004
by
I just installed a used Tactile sensor unit, Now it now read...
- May 13, 2004
by
Unplug the tactile sensor and check the switch with an ohm m...
- May 13, 2004
by
Fastek
My switch is good, I can check the switch and the two photo ...
- May 14, 2004
by
Kuru
Sounds to me like the driver for the tactile is not working....
- May 19, 2004
by
The Tactile Driver old part # is P3746 and MPM changed it to...
- Oct 26, 2004
by
I just noticed your original post was from April.
I just ...
- Oct 26, 2004
by
Hi Ken,
With a lots of help from Harry at Value machine sal...
- Oct 28, 2004
by
Great! I have heard good things about value machines. Have...
- Oct 28, 2004
by
Does anyone know of a company in the San Jose, CA area that ...
- Sep 06, 2005
by
Hi all contact the guys at ALTUS GROUP these guys are all ex...
- Sep 17, 2005
by
JOHNW
When did San Jose move to the UK?
...
- Sep 19, 2005
by
Steve Thomas
Didn't you hear? we're revoking your independence. We left ...
- Sep 19, 2005
by
Rob
wow....he's bloody right........
later,........i mean.......
- Sep 19, 2005
by
Not to mention save your butt twice?
...
- Sep 19, 2005
by
jdengler
Yes, and you ruined all that good work by sending us Billy R...
- Sep 20, 2005
by
Rob
we had to send him somewhere!
...
- Sep 20, 2005
by
Look, he left his mark, OK? I still see at least one mullet ...
- Sep 20, 2005
by
Steve Thomas
Steve,
Dame Edna is from Australia... but keep it quiet, ...
- Sep 21, 2005
by
Don
....and don't mention the cricket....
...
- Sep 22, 2005
by
Rob
Geeze never thought all you guys cared about us Europeans
...
- Sep 22, 2005
by
If you want to help us out.....go straighten out the french!...
- Sep 22, 2005
by