archives

Subscribe to Thread

Ok, call me an idiot, but I can't seem to find the archives ... - Mar 08, 2001 by

Two things 1 Your glue supplier is the best source of adv... - Mar 08, 2001 by davef

Dave is absolutely right, your adhesive supplier must give y... - Mar 14, 2001 by Verm

Antonio

#5502

archives | 8 March, 2001

Ok, call me an idiot, but I can't seem to find the archives to search thru them since the site changed format. I need to know what a good glue curing profile is.

tony

reply »

davef

#5508

archives | 8 March, 2001

Two things

1 Your glue supplier is the best source of advice on cure profiles.

2 Try ... adhesive and cure ... you should get 3 threads

reply »

Verm

#5560

archives | 14 March, 2001

Dave is absolutely right, your adhesive supplier must give you a data sheet with a precise cure profile on it.

We use a cure profile like a trapezium shape with a max temp of 150�C for a period of 120 seconds but this is totally dependant upon the adhesive used. However it may be a base line for you to begin.

G

reply »

SMTnet
»
Electronics Forum
»
archives

Wave Soldering 101 Training Course

Training online, at your facility, or at one of our worldwide training centers"

Reflow Soldering 101 Training Course