Allen Bradley 1440-RMA00-04RC /B XM-440 Master Relay Module

Allen Bradley 1440-RMA00-04RC /B XM-440 Master Relay Module Description:

Contact:

Unik You
unik@cambia.cn
+86 18030205725
(Wechat/ WhatsApp/ Skype)

To install and configure a 1203-CN1 module, you need the following equipment: • Grounding wrist strap (shipped with the module). • 1203-CN1 ControlNet communications module. • 35 x 7.5 mm DIN rail A (Allen-Bradley part number (199-DR1; 46277-3; EN 50022). • 1/8 in. (3.2 mm) flathead screwdriver. • Blunt, pointed instrument (not pen or pencil) for setting the node address. • Ohm meter. • Appropriate cables for SCANport and ControlNet connections. Refer to Chapter 2, Installation, for more information. • 1203-SFC serial cable. • Either a PC running a Windows™ terminal emulation program (e.g., HyperTerminal) or a VT100-compatible terminal. • PC that is: – Running RSNetWorx™, RSLogix5™, and RSLinx™. – Connected to the ControlNet network using a 1784-KTCX card, 1784-PCC card, or 1770-KFC adapter.

The Analog Output Module (cat. no. 1771-OFE) is an intelligent block transfer module that converts binary or four-digit BCD values (supplied by your processor) to analog signals at its four module outputs. The module accomplishes the data transfer with block transfer programming