Double edge splice tape can be used on paper or plastic tape, punched or formed pockets, any cover tape, and come in a variety of widths. It is primarily used for splicing on-the-fly without removing a tape feeder from the pick and place machine. Self alignment pins that stick through the sprocket h...
|
Pick & Place |
Double edge splice tape can be used on paper or plastic tape, punched or formed pockets, any cover tape, and come in a variety of widths. It is primarily used for splicing on-the-fly without removing a tape feeder from the pick and place machine. It was developed for all Panasonic, new Yamaha, and n...
|
Pick & Place |
Double edge splice tape can be used on paper or plastic tape, punched or formed pockets, any cover tape, and come in a variety of widths. It is primarily used for splicing on-the-fly without removing a tape feeder from the pick and place machine. It is recommended that this splice be applied using e...
|
Pick & Place |
Double edge splice tape can be used on paper or plastic tape, punched or formed pockets, any cover tape, and come in a variety of widths. It is primarily used for splicing on-the-fly without removing a tape feeder from the pick and place machine. It is recommended that this splice be applied using e...
|
Pick & Place |
Alignment jigs are used to hold double edge splice tapes for quick and easy splicing of carrier tapes on-the-fly. There are 3 models available starting with the easy to use finger jig with a finger band that is used by the operator right at the placement machine for all tape widths. There are 2 mode...
|
Pick & Place |
Cover Tape Extenders can be used with either paper or plastic tape, punched or formed pockets, any cover tape, and come in a variety of widths, lengths, and thicknesses. We offer the extenders in either 16″ or 20″ lengths and two thicknesses for ease of use on feeders wi...
|
Pick & Place |
Carrier tape extenders are supplied with heat sealed cover tape in 95 meter (311.5 feet) lengths on 13 inch reels. They have standard sprocket holes but no formed pockets, allowing them to be used with any standard carrier tape, including punched paper. The customer can cut the tape to any ...
|
Pick & Place |
Our tape cutting tools can be used with either paper or plastic tape, punched or formed pockets, any cover tape, and cut all tape widths. The 8mm models have an alignment block with 2 sets of sprocket hole locating pins (for 1 and 2mm pitch) that allow for the most accurate cutting and splicing of t...
|
Pick & Place |
Specialized tape cutters that come in 3 models for superior cutting of 8-88mm tapes with light finger pressure and no operator fatigue. One model is for 8mm carrier tapes and cuts 1, 2, and 4mm pitch with peel back cover. The second model cuts 8-32mm carrier tapes and 2, 4, and 8mm pitch with peel b...
|
Pick & Place |
Double splice tape (K.0108.1, K.0112.1, K.0116.1, or K.0124.1) is used for splicing together the top and bottom cover tape or cover tape and pocket bottoms of either 2 reels of taped components, or 2 strips of taped components. Double splice tape can be used with ...
|
Pick & Place |
Double splice tape (K.0108.3, K.0112.3, K.0116.3, or K.0124.3) is used for splicing together the top and bottom cover tape or cover tape and pocket bottoms of either 2 reels of taped components, or 2 strips of taped components. Double splice tape can be used with 8, 12, 16, and 24mm tapes, ...
|
Pick & Place |
Clip and splice tape can be used with either paper or plastic tape, punched or formed pockets, any cover tape, and come in a variety of widths. They were developed to speed up the operation of clipping and splicing tape together. There is now no need to use a separate clip and then a piece of single...
|
Pick & Place |
Brass splicing clips can be used with either paper or plastic tape, punched or formed pockets, any cover tape, and come in single or lead frame configurations. They can only be used with specific splicing tools designed for single clips or lead frames. These tools work with the tape facing away from...
|
Pick & Place |
Smart Splice offers several splicing tools to make tape splicing easier and more accurate. Our 2 models of crimping tools are designed to use brass clips in bulk, lead frame, or the easy to use clip and splice tape, to make splicing fool proof. Our tape splicing tools can be used with eithe...
|
Pick & Place |
Single splice tape (K.0208.0, K.0212.0, K.0216.0, or K.0224.0) is used for splicing together the cover tape of either 2 reels of taped components, or 2 strips of taped components. Single splice tape is usually used in conjunction with SMD brass splice clips and a K.SPL tape splicin...
|
Pick & Place |
Single splice tape w/edge alignment (K.0208.1, K.0212.1, K.0216.1, or K.0224.1) is used for splicing together the cover tape of either 2 reels of taped components, or 2 strips of taped components. Single splice tape is usually used in conjunction with SMD brass splice clips and a K.SPL tape...
|
Pick & Place |
Radial splice tape can be used with either paper or cardboard tape. They are very useful for splicing where a tear occurred or when sequencing components is needed. These splices are available in various styles including a 2 hole fold over type (for front and back), a 3 hole single side type, and a ...
|
Through-Hole |
Axial splice clips can be used with either paper or cardboard tape. They are very useful for splicing where a tear occurred or when sequencing components is needed. These are high quality brass splice clips with a 5 up fold over design, to assure a consistent and secure splice. These splice tapes mi...
|
Through-Hole |
Smart Splice offers Empty Plastic Reels that are anti-static and are available in 4″, 7″, and 13″ diameters. The 4″ reels come in 8mm and 12mm widths, the 7″ reels come in 8-24mm widths, the and 13″ reels are three pieces that com...
|
Tape and Reel Equipment |
Smart Splice does it again with the addition of a complete line of OEM drive and conveyor belts. We have done our homework and found a unique supplier that manufactures these belts using the exact same materials that were used when your belts were supplied to your equipment manufacturer. The big dif...
|
Board Handling - Conveyors |
Smart Splice is now offering products for Assembly Line Solutions to make your production more efficient, more reliable, as well as safer and healthier for all employees. Introducing the “Shoe Cover Magic” line of shoe cover dispensers that makes the application of shoe covers ea...
|
ESD Control Supplies |
Smart Splice is now offering products for Assembly Line Solutions to make your production more efficient, more reliable, as well as safer and healthier for all employees. These are the refill shoe covers designed to work with our “Shoe Cover Magic” dispenser. There are ...
|
ESD Control Supplies |
Smart Splice is now offering products for Assembly Line Solutions to make your production more efficient, more reliable, as well as safer and healthier for all employees. Introducing the “Shoe Cover Magic” line of shoe cover removers that makes the removal of shoe covers quick ea...
|
ESD Control Supplies |