RTO2000 Main features Bandwidth: 600 MHz to 6 GHz Maximum sample rate: 20 Gsample/s Maximum memory depth: 2 Gsample Up to 16-bit vertical resolution MSO: 16&...
|
Test Equipment |
RTO2000 Main features Bandwidth: 600 MHz to 6 GHz Maximum sample rate: 20 Gsample/s Maximum memory depth: 2 Gsample Up to 16-bit vertical resolution MSO: 16&...
|
Test Equipment |
RTO2000 Main features Bandwidth: 600 MHz to 6 GHz Maximum sample rate: 20 Gsample/s Maximum memory depth: 2 Gsample Up to 16-bit vertical resolution MSO: 16&...
|
Test Equipment |
ZND Main features 100 kHz to 4.5 GHz unidirectional dual-port vector network analyzer Frequency range extends to 8.5 GHz Test set can be expanded for bi-directional measur...
|
Test Equipment |
ZVL Main features Wide frequency range, from 5 kHz to 20 GHz 6 GHz models offer optional spectrum analysis and power probe support Continuous wave generator spectral analysis op...
|
Test Equipment |
ZNC3 Main features Frequency range from 9 kHz to 3 GHz Up to 130 dB dynamic range Short scan time: 11 ms (401 scan points) High temperature stability, 0.01 dB/°C&n...
|
Test Equipment |
SMW200A Main features Frequencies up to 67 GHz (dual channel: up to 44 GHz) 2 GHz modulation bandwidth Integrated fading, up to 800 MHz bandwidth and 8x8 MIMO
|
Test Equipment |
SMBV100B Main features Frequency range from 8 kHz to 3 GHz or 6 GHz Ultra-high output power up to +33 dBm 1 GHz modulation bandwidth with high accuracy Signal generati...
|
Test Equipment |
IQxstream-5G Main features Support for all 5G FR1 frequencies within 400 MHz 6000/7300 MHz (Optional support for 7300 MHz with IQxstream-5G+) Support for C-V2X, LTE TDD/ FDD, ...
|
Test Equipment |
IQgig-5G Main features Calibrated RF ports enable direct connection for simple text fixture setups Lab grade performance in compact 2U form factor Support for wider frequency ra...
|
Test Equipment |
IQgig-RF Main features Fully-calibrated one-box tester, enables simple and fast bring-up Supports Over-the-Air (OTA) testing for characterization of WiGig RF modules and end-products
|
Test Equipment |
IQcell-5G Main features End-to-end data throughput with a built-in iPerf server FR1 multicarrier MIMO support with up to 2 CC 4×4 MIMO & 4 CC 2×2 MIMO configuration
|
Test Equipment |
IQnfc+ Main features Functional test checks basic NFC functionalities through the use of standard protocols Functional verification on all key NFC standards through reduced signaling
|
Test Equipment |
IQxel-M4W Main features All RF signal generation, analysis, processing in a single compact 2U form factor Continuous frequency coverage from 400 to 6000 MHz Flexible and compreh...
|
Test Equipment |
IQgig-IF Main features Provides better than -35 dB EVM for high-performance measurements Ideal for WiGig chipset and baseband module characterization at R&D and DVTPrice var...
|
Test Equipment |
IQFR1-RU Main features No external DU emulator required Supports simple waveform-based O-RU testing Provides an optical link to transmit C/U/S/M messages Supports DL&n...
|
Test Equipment |
IQxel-MX Main features Industry-leading EVM ensures highest modulation accuracy Superior power accuracy ensures device calibration precision Scalable MIMO architecture...
|
Test Equipment |
IQcell Main features Simulates true live-network scenarios, configurable for any global band Allows you to directly correlate your products lab test result to its performance in the field...
|
Test Equipment |
4000 X infiniivision Main features PathWave BenchVue Oscilloscope Software for Remote Control, Data Logging and Test Automation Get 200 MHz to 1.5 GHz bandwidth Up to 1,000,000 ...
|
Test Equipment |
6000 X infiniivision Main features PathWave BenchVue Oscilloscope Software for Remote Control, Data Logging and Automated Testing View signals at higher frequencies using bandwidths from ...
|
Test Equipment |
86142A Main features Wavelength range: 600 nm to 1700 nm Range: 0.2 nm to full range and zero range Accuracy: ±0.5 knots (absolute) Resolution bandwidth: 0.06, ...
|
Test Equipment |
86142B Main features Built-in test application 10 pm wavelength accuracy Fast double sweep method Coverage of S, C and L bandsPrice: $5500...
|
Test Equipment |
8562E Main features Continuous 30 Hz to 13.2 GHz scanning Resolution bandwidth of 1 to 100 Hz digitally implemented to increase measurement speed Low phase noise and wide dynami...
|
Test Equipment |
N7734A Main features Repeatability: ±0.01 dB, ±0.004 dB typical Switching time: < 20 ms Operating life: > 1 billion cycles LAN, USB and GP...
|
Test Equipment |
N6731B Main features High optical output power: +13 dBm Wide tuning range: 1520 nm to 1630 nm Built-in wavelength meter provides high accuracy: +/-20 pm Built-in ...
|
Test Equipment |
U8000 Series - 90-150W Main features Excellent modulation (0.01% + 2mV; 0.02% + 2mA) Fast 50µs instantaneous response Low output noise, 1mVrms and 3mArms at 20Hz to 20MHz ...
|
Test Equipment |
33500B Main features 33500U for 1 and 2 channels Stability to 0.1 ppmPrice vary with options. Feel free to contact me for more details of 33500B.
...
|
Test Equipment |
33600U Main features Faster throughput and longer uptime Excellent output power allows it to perform basic component testing and receiver function verification Simul...
|
Test Equipment |
N1090A Main features High sensitivity optical channel with < 1 µW noise Optical reference receiver meets industry specifications for verification of compliance with standards&...
|
Test Equipment |
N1092A Main features High sensitivity with < 5 µW noise Ultra-fast throughput with sampling rates up to 250 kHz Accurate high-speed data analysis with jitter <...
|
Test Equipment |
N1094B Main features Selectable 20/30 GHz or 20/33/40/50 GHz bandwidths 2.4 mm input type High sensitivity with background noise of only 310 µV (20 GHz), 600 µV (50 ...
|
Test Equipment |
N7020A Main features Low noise: Probe has a 1:1 attenuation ratio, increasing the background noise of the oscilloscope by only 10% Wide bias range: A wide bias range of +/-24 V allows the...
|
Test Equipment |
3458A Main features DC voltage (DCV) accuracy of up to 8 ppm per year (up to 4 ppm with options) Ultra-fast measurement speed of up to 100,000 readings/second maximizes productivity
|
Test Equipment |
81531A Main features Sensor type: InGaAs Wavelength range: 800-1700 nm Power range: +3 to -90 dBm Accuracy: ±2.5% (1000-1650 nm)Pri...
|
Test Equipment |
81532A Main features Sensor type: InGaAs Wavelength range: 800-1700 nm Power range: +3 to -90 dBm Accuracy: ±2.5% (1000-1650 nm)Pri...
|
Test Equipment |
M9505A Main features 5 slots for AXIe instrument modules Embedded AXIe System Module High power, 200W heat dissipation capability/slot Gigabit LAN connecti...
|
Test Equipment |
81480A Main features Wavelength range: 1370nm to 1480nm Maximum output power: + 5.5dBm Wavelength accuracy (absolute value): ±0.01nm Wavelength repeatability (t...
|
Test Equipment |
81640A Main features Wavelength range: 1510nm to 1640nm Maximum output power: 4dBm Wavelength accuracy (absolute value): ±0.015nm Wavelength repeata...
|
Test Equipment |
81682A Main features Wavelength range: 1460nm to 1580nm Maximum output power: 8dBm Wavelength accuracy (absolute value): ± 0.01nm Wavelength repeatability (typi...
|
Test Equipment |
E36100 Main features 5 models to choose from, providing up to 5 A current or 100 V Low output noise for sensitive devices - ripple and noise less than 350µVrms Overvoltage...
|
Test Equipment |
E36100 Main features 5 models to choose from, providing up to 5 A current or 100 V Low output noise for sensitive devices - ripple and noise less than 350µVrms Overvoltage...
|
Test Equipment |
N7776C Main features Wavelength: 1240-1380 nm or 1340-1495 nm or 1450-1650 nm or 1490-1640 nm Scanning speed: up to 200 nm/s, bidirectional Maximum power: > +12 dBm peak (opt...
|
Test Equipment |
N7778C Main features Wavelength: 1240-1380 nm or 1340-1495 nm or 1450-1650 nm or 1490-1640 nm Scanning speed: up to 200 nm/s, bidirectional Maximum power: > +12 dBm peak typi...
|
Test Equipment |
81525A Main features High Power InGaAs Sensors 1250-1650nm power measurement: -70 dBm to +27 dBm 800-1250nm Power measurement: -70 dBm to +23 dBm Range: 85...
|
Test Equipment |
N1912A Main features 30 MHz video bandwidth Capable of performing a single real-time capture at a sampling rate of up to 100 MSa/s 22 pre-defined standards: WiMAX, DME, HSDPA, e...
|
Test Equipment |
N1913A Main features Frequency range of 9 kHz to 110 GHz (depending on sensor) Wide dynamic range of -70 to +44 dBm (depending on sensor) Learn about advanced GPIB including LAN...
|
Test Equipment |
N5181B Main features Standard phase noise Standard output power of +18 dBm Electronic attenuator 50W reverse power protection Power cord to meet specific nat...
|
Test Equipment |
N5181B Main features Standard phase noise Standard output power of +18 dBm Electronic attenuator 50W reverse power protection Power cord to meet specific nat...
|
Test Equipment |
N5181B Main features Standard phase noise Standard output power of +18 dBm Electronic attenuator 50W reverse power protection Power cord to meet specific nat...
|
Test Equipment |
N5181B Main features Standard phase noise Standard output power of +18 dBm Electronic attenuator 50W reverse power protection Power cord to meet specific nat...
|
Test Equipment |