PCB Vacuum Loader For SMT | SZTech-SMT
Company Information:
Name: |
PCB Vacuum Loader For SMT | SZTech-SMT |
Category: |
|
Offered by: |
|
PCB Vacuum Loader For SMT | SZTech-SMT Description:
PCB vacuum loader from SZTech SMT provides the most high-quality performance loader solution for SMT.
It is very easy to load the PCB into the SMT line. A conveyor system is connected smoothly with SMEMA signal control.
This model is mainly suitable for the front section of the SMT production line.
The control system adopts PLC control, and the operation interface adopts a touch screen.
The method of board loading adopts vacuum adsorption to transfer and drop, and 200-300 PCBs can be stacked.
The lifting step can be automatically adjusted according to the thickness of the PCB.
Main specifications
Specification | VL-250 | VL-400 |
Power supply | AC 220V/ 50/60Hz | |
Air supply | 5 kg f/cm² | |
PCB size (mm) | 330*50~250 | 445*50~330 |
PCB transport direction | Customize left to right or right to left | |
Rail fixed | Front side or back side | |
Storage height | 200 mm | |
Transport height | 900 ± 20 mm or 950 ± 20mm | |
Main motor power | 300w | |
Machine size | 600*1130*1270 | 600*1250*1270 |
Weight (kg) | 170 | 200 |
Control panel | Touch screen |
Product changing process of PCB vacuum loader
1. Press Stop and Reset.
2. Need to input the Password “8888” before changing the parameter setting every time.
3. Go to the parameter interface, and click Rail width reset to reset the rail width first.
4. Measure the board width, set it into the Rail Width setting, and click Adjust rail width.
Making sure the board can go in and out of the conveyor system smoothly.
5. Click Manual to let the machine run in manual mode and follow the below to check
whether the board can load into the conveyor system and send it out to the next machine smoothly.
PCB Vacuum Loader For SMT | SZTech-SMT was added in Apr 2023
PCB Vacuum Loader For SMT | SZTech-SMT has been viewed 84 times
20 More Products from SZTech-SMT Firm :