Industry Directory | Manufacturer
Manufacturer of Real-time Automated Xray Inspection. Focus on SMT solder joint inspection of hidden joints ie, BGAs and PTH Barrel Fill per IPC-610. Clients include leading manufacturers in the electronics/automotive Industries.
New Equipment | Wave Soldering
The most advanced high-performance wave soldering system designed for high-volume manufacturing. Electra's proven performance has provided the electronics assembly industry with world-class soldering results. The Electra system is designed with
New Equipment | Wave Soldering
The Ideal Wave Soldering System for Low-to-Medium Volume Lead-free Pproduction. The award-winning ELECTROVERT VectraES wave soldering system features exceptional system-wide accessibility, an advanced control system and innovative sub-system technol
Electronics Forum | Wed Aug 21 09:09:50 EDT 2013 | wcheew
I am having solder barrel fill issues on THM component, we follow, we follow IPC 610 E requirement. The barrel fill issues happen on signal & ground pin at connector & E-cap. I found out that most of the insufficient solder happen on the connector ag
Electronics Forum | Wed Aug 21 17:03:13 EDT 2013 | hegemon
I think your pre-heat temp is a little low for SAC 305 Soldering. Especially with a Pallet. You might want to try to add some time and temp to get the PWB itself preheated up to 150-160C. That should help with the barrel fill. Make sure your board
Used SMT Equipment | Soldering - Selective
Vintage: 2007 Details: • Leaded-currently filled with solder • Single Pot • Topside Preheat • Nitrogen capable • Set up camera • Spray fluxer • 3 nozzles included Condition: Complete & Operational Location: LCI FL / FOB origin
Industry News | 2020-04-14 18:49:39.0
EAE, the Electronic Assembly Equipment division of ITW is the proud recipient of an IPC APEX 2020 New Product Innovation (NPI) Award. The award recognizes the Electrovert DwellFlex 4.0 wave solder nozzle.
Industry News | 2018-03-13 18:51:40.0
SMTA is excited to announce the technical program has been finalized and registration is now open for the South East Asia Technical Conference on Electronics Assembly. The event will be held May 8-10, 2018 at the MITEC in Kuala Lumpur, Malaysia.
Technical Library | 2019-06-21 10:39:15.0
Recently, an ACI Technologies (ACI) customer called to discuss failures that they had observed with some through-hole capacitor parts. The components were experiencing failures following vibration and accelerated stress testing. Upon receipt of the samples, ACI performed three levels of inspection and Energy Dispersive Spectroscopy (EDS) testing to investigate the root cause of the failures. These analyses enabled ACI to verify the elements comprising the solder joints and make the following recommendations in order to prevent future occurrences. The first inspection was to investigate the capacitor leads using optical microscopy, and no anomalies were found that could indicate bad parts from the vendor or improper handling prior to assembly. However, vertical fill in the barrel of the plated through-holes was too close to the IPC-A-610 minimum specification of 75% to determine a pass/fail condition, and therefore required further investigation.
Technical Library | 2015-02-27 17:06:01.0
The drive towards fine pitch technology also affects the soldering processes. Selective soldering is a reliable soldering process for THT (through hole) connectors and offers a wide process window for designers. THT connectors can be soldered on the top and bottom side of boards, board in board, PCBs to metal shields or housing out of plastic or aluminum are today's state of the art. The materials that are used to make the solder connections require higher temperatures. Due to the introduction of lead-free alloys, the boards need more heat to get the barrels filled with solder. This not only affects the properties of the flux and components, but the operation temperatures of solder machines become higher (...)First the impact of temperature will be discussed for the separate process steps and for machine tooling. In the experimental part measurements are done to verify the accuracy that can be achieved using today's selective soldering machines. Dedicated tooling is designed to achieve special requirements with respect to component position accuracy.
Electrovert's DwellFlex 4.0 is the first solder nozzle designed specifically with Industry 4.0 automation in mind. The patent pending design enables the length of the wave to be adjusted on-the-fly as variable board types are run through the wave.
Training Courses | | | Other Courses
Other courses related to electronics manufacturing and assembly
Training Courses | | | IPC-7711/7721 Specialist (CIS)
The Certified IPC-7711/7721 Specialist (CIS) training focuses on rework of electronic assemblies and repair and modification of printed boards and electronic assemblies.